RE: [PATCH v2 0/2] Add RZ/G2L DSI driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi All,

Gentle ping. Are we happy with this patch series?
Please let me know.

Cheers,
Biju

> Subject: [PATCH v2 0/2] Add RZ/G2L DSI driver
> 
> This patch series aims to support the MIPI DSI encoder found in the RZ/G2L
> SoC. It currently supports DSI mode only.
> 
> This unit supports MIPI Alliance Specification for Display Serial
> Interface (DSI) Specification. This unit provides a solution for
> transmitting MIPI DSI compliant digital video and packets. Normative
> References are below.
> * MIPI Alliance Specification for Display Serial Interface Version 1.3.1
> * MIPI Alliance Specification for D-PHY Version 2.1
> 
> The following are key features of this unit.
> 
> * 1 channel
> * The number of Lane: 4-lane
> * Support up to Full HD (1920 × 1080), 60 fps (RGB888)
> * Maximum Bandwidth: 1.5 Gbps per lane
> * Support Output Data Format: RGB666 / RGB888
> 
> v1->v2:
>  * Added full path for dsi-controller.yaml
>  * Modeled DSI + D-PHY as single block and updated reg property
>  * Fixed typo D_PHY->D-PHY
>  * Updated description
>  * Added interrupts and interrupt-names and updated the example
>  * Driver rework based on dt-binding changes (DSI + D-PHY) as single block
>  * Replaced link_mmio and phy_mmio with mmio in struct rzg2l_mipi_dsi
>  * Replaced rzg2l_mipi_phy_write with rzg2l_mipi_dsi_phy_write
>    and rzg2l_mipi_dsi_link_write
>  * Replaced rzg2l_mipi_phy_read->rzg2l_mipi_dsi_link_read
> RFC->v1:
>  * Added a ref to dsi-controller.yaml.
>  * Added "depends on ARCH_RENESAS || COMPILE_TEST" on KCONFIG
>    and dropped DRM as it is implied by DRM_BRIDGE
>  * Used devm_reset_control_get_exclusive() for reset handle
>  * Removed bool hsclkmode from struct rzg2l_mipi_dsi
>  * Added error check for pm, using pm_runtime_resume_and_get() instead of
>    pm_runtime_get_sync()
>  * Added check for unsupported formats in rzg2l_mipi_dsi_host_attach()
>  * Avoided read-modify-write stopping hsclock
>  * Used devm_platform_ioremap_resource for resource allocation
>  * Removed unnecessary assert call from probe and remove.
>  * wrap the line after the PTR_ERR() in probe()
>  * Updated reset failure messages in probe
>  * Fixed the typo arstc->prstc
>  * Made hex constants to lower case.
> RFC:
>  *
> 
> Biju Das (2):
>   dt-bindings: display: bridge: Document RZ/G2L MIPI DSI TX bindings
>   drm: rcar-du: Add RZ/G2L DSI driver
> 
>  .../bindings/display/bridge/renesas,dsi.yaml  | 175 +++++
>  drivers/gpu/drm/rcar-du/Kconfig               |   8 +
>  drivers/gpu/drm/rcar-du/Makefile              |   1 +
>  drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c      | 686 ++++++++++++++++++
>  drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h | 149 ++++
>  5 files changed, 1019 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
>  create mode 100644 drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi.c
>  create mode 100644 drivers/gpu/drm/rcar-du/rzg2l_mipi_dsi_regs.h
> 
> --
> 2.17.1





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux