The current compatible strings for SSD130x I2C controllers contain both an
"fb" and "-i2c" suffixes. It seems to indicate that are for a fbdev driver
and also that are for devices that can be accessed over an I2C bus.
But a DT is supposed to describe the hardware and not Linux implementation
details. So let's deprecate those compatible strings and add new ones that
only contain the vendor and device name, without any of these suffixes.
These will just describe the device and can be matched by both I2C and SPI
DRM drivers. The required properties should still be enforced for old ones.
While being there, just drop the "sinowealth,sh1106-i2c" compatible string
since that was never present in a released Linux version.
Signed-off-by: Javier Martinez Canillas <javierm@xxxxxxxxxx>
Acked-by: Mark Brown <broonie@xxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
Changes in v3:
- Drop the "sinowealth,sh1106-i2c", wasn't in a released version (Chen-Yu Tsai)
- Continue enforcing required properties for deprecated strings (Maxime Ripard)
Changes in v2:
- Drop the -i2c suffixes from the compatible strings too (Geert Uytterhoeven)
.../bindings/display/solomon,ssd1307fb.yaml | 44 +++++++++++++------
1 file changed, 31 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
index ade61d502edd..7653b6c3fcb6 100644
--- a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
+++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
@@ -12,12 +12,22 @@ maintainers:
properties:
compatible:
- enum:
- - sinowealth,sh1106-i2c
- - solomon,ssd1305fb-i2c
- - solomon,ssd1306fb-i2c
- - solomon,ssd1307fb-i2c
- - solomon,ssd1309fb-i2c
+ oneOf:
+ # Deprecated compatible strings
+ - items:
+ - enum:
+ - solomon,ssd1305fb-i2c
+ - solomon,ssd1306fb-i2c
+ - solomon,ssd1307fb-i2c
+ - solomon,ssd1309fb-i2c
+ deprecated: true
+ - items:
+ - enum:
+ - sinowealth,sh1106
+ - solomon,ssd1305
+ - solomon,ssd1306
+ - solomon,ssd1307
+ - solomon,ssd1309
reg:
maxItems: 1
@@ -136,7 +146,7 @@ allOf:
properties:
compatible:
contains:
- const: sinowealth,sh1106-i2c
+ const: sinowealth,sh1106
then:
properties:
solomon,dclk-div:
@@ -148,7 +158,9 @@ allOf:
properties:
compatible:
contains:
- const: solomon,ssd1305fb-i2c
+ enum:
+ - solomon,ssd1305-i2c
+ - solomon,ssd1305
then:
properties:
solomon,dclk-div:
@@ -160,7 +172,9 @@ allOf:
properties:
compatible:
contains:
- const: solomon,ssd1306fb-i2c
+ enum:
+ - solomon,ssd1306-i2c
+ - solomon,ssd1306
then:
properties:
solomon,dclk-div:
@@ -172,7 +186,9 @@ allOf:
properties:
compatible:
contains:
- const: solomon,ssd1307fb-i2c
+ enum:
+ - solomon,ssd1307-i2c
+ - solomon,ssd1307
then:
properties:
solomon,dclk-div:
@@ -186,7 +202,9 @@ allOf:
properties:
compatible:
contains:
- const: solomon,ssd1309fb-i2c
+ enum:
+ - solomon,ssd1309-i2c
+ - solomon,ssd1309
then:
properties:
solomon,dclk-div:
@@ -203,14 +221,14 @@ examples:
#size-cells = <0>;
ssd1307: oled@3c {
- compatible = "solomon,ssd1307fb-i2c";
+ compatible = "solomon,ssd1307";
reg = <0x3c>;
pwms = <&pwm 4 3000>;
reset-gpios = <&gpio2 7>;
};
ssd1306: oled@3d {
- compatible = "solomon,ssd1306fb-i2c";
+ compatible = "solomon,ssd1306";
reg = <0x3c>;
pwms = <&pwm 4 3000>;
reset-gpios = <&gpio2 7>;
--
2.35.1
