Dne petek, 08. april 2022 ob 12:32:25 CEST je Sandor Yu napisal(a):
> i.MX8MPlus (v2.13a) has verified need the workaround to clear the
> overflow with one iteration.
> Only i.MX6Q(v1.30a) need the workaround with 4 iterations,
> the others versions later than v1.3a have been identified as needing
> the workaround with a single iteration.
>
> Default enable the workaround with one iteration for all versions
> later than v1.30a.
>
> Signed-off-by: Sandor Yu <Sandor.yu@xxxxxxx>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 23 +++++++----------------
> 1 file changed, 7 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index
> 4befc104d220..02d8f7e08814 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -2086,30 +2086,21 @@ static void dw_hdmi_clear_overflow(struct dw_hdmi
> *hdmi) * then write one of the FC registers several times.
> *
> * The number of iterations matters and depends on the HDMI TX
revision
> - * (and possibly on the platform). So far i.MX6Q (v1.30a), i.MX6DL
> - * (v1.31a) and multiple Allwinner SoCs (v1.32a) have been
identified
> - * as needing the workaround, with 4 iterations for v1.30a and 1
> - * iteration for others.
> - * The Amlogic Meson GX SoCs (v2.01a) have been identified as
needing
> - * the workaround with a single iteration.
> - * The Rockchip RK3288 SoC (v2.00a) and RK3328/RK3399 SoCs
(v2.11a) have
> - * been identified as needing the workaround with a single
iteration.
> + * (and possibly on the platform).
> + * 4 iterations for i.MX6Q(v1.30a) and 1 iteration for others.
> + * i.MX6DL (v1.31a), Allwinner SoCs (v1.32a), Rockchip RK3288 SoC
> (v2.00a), + * Amlogic Meson GX SoCs (v2.01a), RK3328/RK3399 SoCs (v2.11a)
> + * and i.MX8MPlus (v2.13a) have been identified as needing the
workaround
> + * with a single iteration.
> */
It would be easier to read and modify later if platforms/controllers/variants
are given as list, one per line, but it could be done later.
Best regards,
Jernej
>
> switch (hdmi->version) {
> case 0x130a:
> count = 4;
> break;
> - case 0x131a:
> - case 0x132a:
> - case 0x200a:
> - case 0x201a:
> - case 0x211a:
> - case 0x212a:
> + default:
> count = 1;
> break;
> - default:
> - return;
> }
>
> /* TMDS software reset */
