Re: [PATCH v0 07/10] phy: freescale: add Samsung HDMI PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Lucas,

On Mi, 2022-04-06 at 18:01 +0200, Lucas Stach wrote:
> This adds the driver for the Samsung HDMI PHY found on the
> i.MX8MP SoC.
> 
> Heavily based on the PHY implementation in the downstream kernel
> written by Sandor Yu <Sandor.yu@xxxxxxx>, but also cleaned up
> quite a bit and extended to support runtime PM.
> 
> Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> ---
> FIXME: The PHY configuration could be cleaned up further, it
> currently has a lot of register writes that are same across
> all supported modes.

Agreed.

[...]
> ---
>  drivers/phy/freescale/Kconfig                |    7 +
>  drivers/phy/freescale/Makefile               |    1 +
>  drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 1145 ++++++++++++++++++
>  3 files changed, 1153 insertions(+)
>  create mode 100644 drivers/phy/freescale/phy-fsl-samsung-hdmi.c
> 
> diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
> index f9c54cd02036..f80c92eb7c55 100644
> --- a/drivers/phy/freescale/Kconfig
> +++ b/drivers/phy/freescale/Kconfig
> @@ -26,6 +26,13 @@ config PHY_FSL_IMX8M_PCIE
>  	  Enable this to add support for the PCIE PHY as found on
>  	  i.MX8M family of SOCs.
>  
> +config PHY_FSL_SAMSUNG_HDMI_PHY
> +	tristate "Samsung HDMI PHY support"
> +	depends on OF && HAS_IOMEM
> +	select GENERIC_PHY

Why select GENERIC_PHY when all the driver does is register a clock?

[...]
> +struct fsl_samsung_hdmi_phy {
> +	struct device *dev;
> +	void __iomem *regs;
> +	struct clk *apbclk;
> +	struct clk *refclk;

refclk isn't really used beyond phy_clk_register, it doesn't have to be
stored in struct fsl_samsung_hdmi_phy.

> +
> +	/* clk provider */
> +	struct clk_hw hw;
> +	const struct phy_config *cur_cfg;
> +};
> +
> +static inline struct fsl_samsung_hdmi_phy *
> +to_fsl_samsung_hdmi_phy(struct clk_hw *hw)
> +{
> +	return container_of(hw, struct fsl_samsung_hdmi_phy, hw);
> +}
> +
> +static void fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
> +					  const struct phy_config *cfg)
> +{
> +	int i;
> +
> +	/* HDMI PHY init */
> +	writeb(REG33_FIX_DA, phy->regs + PHY_REG_33);
> +
> +	for (i = 0; i < PHY_PLL_REGS_NUM; i++)
> +		writeb(cfg->regs[i], phy->regs + i * 4);
> +
> +	writeb(REG33_FIX_DA | REG33_MODE_SET_DONE , phy->regs + PHY_REG_33);
> +}
> +
> +static int phy_clk_prepare(struct clk_hw *hw)
> +{
> +	struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
> +	int ret = 0;
> +	u8 val;
> +
> +	return 0;

I'd say remove this line or pyh_clk_prepare().

> +	ret = readb_poll_timeout(phy->regs + PHY_REG_34, val,
> +				 val & REG34_PLL_LOCK,
> +				 20, 20000);
> +	if (ret)
> +		dev_err(phy->dev, "PLL failed to lock\n");
> +
> +	return ret;
> +}
> +
> +static unsigned long phy_clk_recalc_rate(struct clk_hw *hw,
> +					 unsigned long parent_rate)
> +{
> +	struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
> +
> +	if (!phy->cur_cfg)
> +		return 0;
> +
> +	return phy->cur_cfg->clk_rate;
> +}
> +
> +static long phy_clk_round_rate(struct clk_hw *hw,
> +			       unsigned long rate, unsigned long *parent_rate)
> +{
> +	const struct phy_config *phy_cfg = phy_pll_cfg;
> +
> +	for (; phy_cfg->clk_rate != 0; phy_cfg++)
> +		if (phy_cfg->clk_rate == rate)

 * @round_rate: Given a target rate as input, returns the closest rate actually
 *              supported by the clock. The parent rate is an input/output
 *              parameter.

This should round, not -EINVAL on unsupported rates.

> +			break;
> +
> +	if (phy_cfg->clk_rate == 0)
> +		return -EINVAL;
> +
> +	return phy_cfg->clk_rate;
> +}
> +
> +static int phy_clk_set_rate(struct clk_hw *hw,
> +			    unsigned long rate, unsigned long parent_rate)
> +{
> +	struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
> +	const struct phy_config *phy_cfg = phy_pll_cfg;
> +	int ret = 0;

Unnecessary initialization.

> +	u8 val;
> +
> +	for (; phy_cfg->clk_rate != 0; phy_cfg++)
> +		if (phy_cfg->clk_rate == rate)
> +			break;
> +
> +	if (phy_cfg->clk_rate == 0)
> +		return -EINVAL;
> +
> +	phy->cur_cfg = phy_cfg;
> +
> +	fsl_samsung_hdmi_phy_configure(phy, phy_cfg);
> +
> +	ret = readb_poll_timeout(phy->regs + PHY_REG_34, val,
> +				 val & REG34_PLL_LOCK,
> +				 50, 20000);
> +	if (ret)
> +		dev_err(phy->dev, "PLL failed to lock\n");
> +
> +	return ret;
> +}
> +
> +static const struct clk_ops phy_clk_ops = {
> +	.prepare = phy_clk_prepare,
> +	.recalc_rate = phy_clk_recalc_rate,
> +	.round_rate = phy_clk_round_rate,
> +	.set_rate = phy_clk_set_rate,
> +};
> +
> +static int phy_clk_register(struct fsl_samsung_hdmi_phy *phy)
> +{
> +	struct device *dev = phy->dev;
> +	struct device_node *np = dev->of_node;
> +	struct clk_init_data init;
> +	const char *parent_name;
> +	struct clk *phyclk;
> +	int ret;
> +
> +	parent_name = __clk_get_name(phy->refclk);
> +
> +	init.parent_names = &parent_name;
> +	init.num_parents = 1;
> +	init.flags = 0;
> +	init.name = "hdmi_pclk";
> +	init.ops = &phy_clk_ops;
> +
> +	phy->hw.init = &init;
> +
> +	phyclk = devm_clk_register(dev, &phy->hw);
> +	if (IS_ERR(phyclk))
> +		return dev_err_probe(dev, PTR_ERR(phyclk),
> +				     "failed to register clock\n");
> +
> +	ret = of_clk_add_provider(np, of_clk_src_simple_get, phyclk);
> +	if (ret)
> +		return dev_err_probe(dev, ret,
> +				     "failed to register clock provider\n");
> +
> +	return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_probe(struct platform_device *pdev)
> +{
> +	struct fsl_samsung_hdmi_phy *phy;
> +	int ret;
> +
> +	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
> +	if (!phy)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, phy);
> +	phy->dev = &pdev->dev;
> +
> +	phy->regs = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(phy->regs))
> +		return PTR_ERR(phy->regs);
> +
> +	phy->apbclk = devm_clk_get(phy->dev, "apb");
> +	if (IS_ERR(phy->apbclk))
> +		return dev_err_probe(phy->dev, PTR_ERR(phy->apbclk),
> +				     "failed to get apb clk\n");
> +
> +	phy->refclk = devm_clk_get(phy->dev, "ref");
> +	if (IS_ERR(phy->refclk))
> +		return dev_err_probe(phy->dev, PTR_ERR(phy->refclk),
> +				     "failed to get ref clk\n");
> +
> +	ret = clk_prepare_enable(phy->apbclk);
> +	if (ret) {
> +		dev_err(phy->dev, "failed to enable apbclk\n");
> +		return ret;
> +	}
> +
> +	pm_runtime_get_noresume(phy->dev);
> +	pm_runtime_set_active(phy->dev);
> +	pm_runtime_enable(phy->dev);
> +
> +	ret = phy_clk_register(phy);
> +	if (ret) {
> +		dev_err(&pdev->dev, "register clk failed\n");
> +		goto register_clk_failed;
> +	}
> +
> +	pm_runtime_put(phy->dev);
> +
> +	return 0;
> +
> +register_clk_failed:
> +	clk_disable_unprepare(phy->apbclk);
> +
> +	return ret;
> +}
> +
> +static int fsl_samsung_hdmi_phy_remove(struct platform_device *pdev)
> +{
> +	of_clk_del_provider(pdev->dev.of_node);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int fsl_samsung_hdmi_phy_suspend(struct device *dev)
> +{
> +	struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
> +
> +	clk_disable_unprepare(phy->apbclk);
> +
> +	return 0;
> +}
> +
> +static int fsl_samsung_hdmi_phy_resume(struct device *dev)
> +{
> +	struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = clk_prepare_enable(phy->apbclk);
> +	if (ret) {
> +		dev_err(phy->dev, "failed to enable apbclk\n");
> +		return ret;
> +	}
> +
> +	if (phy->cur_cfg)
> +		fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);

Not checking PLL lock during resume?


regards
Philipp




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux