This bit of code is (e)DP and aux I2C link specific, move it into tc_aux_link_setup() to permit cleaner addition of DSI-to-DPI mode. No functional change. Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> Tested-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> # In both DPI to eDP and DSI to DPI mode. Signed-off-by: Marek Vasut <marex@xxxxxxx> Cc: Jonas Karlman <jonas@xxxxxxxxx> Cc: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx> Cc: Maxime Ripard <maxime@xxxxxxxxxx> Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx> Cc: Sam Ravnborg <sam@xxxxxxxxxxxx> --- V2: - New patch V3: - Add RB from Lucas V4: - Add TB from Lucas V5: - No change V6: - No change --- drivers/gpu/drm/bridge/tc358767.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index 0f24156543ba..8a8b495aa0ad 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -656,6 +656,12 @@ static int tc_aux_link_setup(struct tc_data *tc) if (ret) goto err; + /* Register DP AUX channel */ + tc->aux.name = "TC358767 AUX i2c adapter"; + tc->aux.dev = tc->dev; + tc->aux.transfer = tc_aux_transfer; + drm_dp_aux_init(&tc->aux); + return 0; err: dev_err(tc->dev, "tc_aux_link_setup failed: %d\n", ret); @@ -1736,12 +1742,6 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id) if (ret) return ret; - /* Register DP AUX channel */ - tc->aux.name = "TC358767 AUX i2c adapter"; - tc->aux.dev = tc->dev; - tc->aux.transfer = tc_aux_transfer; - drm_dp_aux_init(&tc->aux); - tc->bridge.funcs = &tc_edp_bridge_funcs; if (tc->hpd_pin >= 0) tc->bridge.ops |= DRM_BRIDGE_OP_DETECT; -- 2.35.1
