Re: [PATCH v13 3/6] dt-bindings: display: Add Loongson display controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Mar 27, 2022 at 9:29 PM Sui Jingfeng <15330273260@xxxxxx> wrote:
>
> Add DT bindings and simple usages for Loongson display controller
> found in LS7A1000 bridge chip and LS2k1000 SoC.
>
> Signed-off-by: Sui Jingfeng <15330273260@xxxxxx>
> ---
>  .../loongson/loongson,display-controller.yaml | 321 ++++++++++++++++++
>  1 file changed, 321 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml
> new file mode 100644
> index 000000000000..34060ed55a25
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml
> @@ -0,0 +1,321 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/loongson/loongson,display-controller.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Loongson LS7A1000/LS2K1000/LS2K0500 Display Controller Device Tree Bindings
> +
> +maintainers:
> +  - Sui Jingfeng <suijingfeng@xxxxxxxxxxx>
> +
> +description: |+
> +
> +  Loongson display controllers are simple which require scanout buffers
> +  to be physically contiguous. LS2K1000/LS2K0500 is a SOC, only system
> +  memory is available. LS7A1000/LS7A2000 is bridge chip which is equipped
> +  with a dedicated video RAM which is 64MB or more, precise size can be
> +  read from the PCI BAR 2 of the GPU device(0x0014:0x7A15) in the bridge
> +  chip.
> +
> +  LSDC has two display pipes, each way has a DVO interface which provide
> +  RGB888 signals, vertical & horizontal synchronisations, data enable and
> +  the pixel clock. LSDC has two CRTC, each CRTC is able to scanout from
> +  1920x1080 resolution at 60Hz. Each CRTC has two FB address registers.
> +
> +  For LS7A1000, there are 4 dedicated GPIOs whose control register is
> +  located at the DC register space. They are used to emulate two way i2c,
> +  One for DVO0, another for DVO1.
> +
> +  LS2K1000 and LS2K0500 SoC grab i2c adapter from other module, either
> +  general purpose GPIO emulated i2c or hardware i2c in the SoC.
> +
> +  LSDC's display pipeline have several components as below description,
> +
> +  The display controller in LS7A1000:
> +     ___________________                                     _________
> +    |            -------|                                   |         |
> +    |  CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monitor |
> +    |  _   _     -------|        ^             ^            |_________|
> +    | | | | |    -------|        |             |
> +    | |_| |_|    | i2c0 <--------+-------------+
> +    |            -------|
> +    |   DC IN LS7A1000  |
> +    |  _   _     -------|
> +    | | | | |    | i2c1 <--------+-------------+
> +    | |_| |_|    -------|        |             |             _________
> +    |            -------|        |             |            |         |
> +    |  CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> |  Panel  |
> +    |            -------|                                   |_________|
> +    |___________________|
> +
> +  Simple usage of LS7A1000 with LS3A4000 CPU:
> +
> +    +------+            +------------------------------------+
> +    | DDR4 |            |  +-------------------+             |
> +    +------+            |  | PCIe Root complex |   LS7A1000  |
> +       || MC0           |  +--++---------++----+             |
> +  +----------+  HT 3.0  |     ||         ||                  |
> +  | LS3A4000 |<-------->| +---++---+  +--++--+     +---------+   +------+
> +  |   CPU    |<-------->| | GC1000 |  | LSDC |<--->| DDR3 MC |<->| VRAM |
> +  +----------+          | +--------+  +-+--+-+     +---------+   +------+
> +       || MC1           +---------------|--|-----------------+
> +    +------+                            |  |
> +    | DDR4 |          +-------+   DVO0  |  |  DVO1   +------+
> +    +------+   VGA <--|ADV7125|<--------+  +-------->|TFP410|--> DVI/HDMI
> +                      +-------+                      +------+
> +
> +  The display controller in LS2K1000/LS2K0500:
> +     ___________________                                     _________
> +    |            -------|                                   |         |
> +    |  CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monitor |
> +    |  _   _     -------|        ^              ^           |_________|
> +    | | | | |           |        |              |
> +    | |_| |_|           |     +------+          |
> +    |                   <---->| i2c0 |<---------+
> +    |   DC IN LS2K1000  |     +------+
> +    |  _   _            |     +------+
> +    | | | | |           <---->| i2c1 |----------+
> +    | |_| |_|           |     +------+          |            _________
> +    |            -------|        |              |           |         |
> +    |  CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> |  Panel  |
> +    |            -------|                                   |_________|
> +    |___________________|
> +
> +properties:
> +  $nodename:
> +    pattern: "^display-controller@[0-9a-f],[0-9a-f]$"
> +
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - loongson,ls7a1000-dc
> +              - loongson,ls2k1000-dc
> +              - loongson,ls2k0500-dc
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +  i2c@6:

NAK on made-up bus numbers. See v11 discussion for details.

Rob



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux