Re: [PATCH v9 01/22] dt-bindings: mediatek,dpi: Add DP_INTF compatible

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 28/03/2022 00:39, Guillaume Ranquet wrote:
From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>

DP_INTF is similar to DPI but does not have the exact same feature set
or register layouts.

DP_INTF is the sink of the display pipeline that is connected to the
DisplayPort controller and encoder unit. It takes the same clocks as
DPI.

Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>

Reviewed-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>

---
  .../bindings/display/mediatek/mediatek,dpi.yaml       | 11 ++++++-----
  1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index dd2896a40ff0..2dba80ad3b18 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -4,16 +4,16 @@
  $id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
  $schema: http://devicetree.org/meta-schemas/core.yaml#
-title: mediatek DPI Controller Device Tree Bindings
+title: mediatek DPI/DP_INTF Controller
maintainers:
    - CK Hu <ck.hu@xxxxxxxxxxxx>
    - Jitao shi <jitao.shi@xxxxxxxxxxxx>
description: |
-  The Mediatek DPI function block is a sink of the display subsystem and
-  provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel
-  output bus.
+  The Mediatek DPI and DP_INTF function blocks are a sink of the display
+  subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a
+  parallel output bus.
properties:
    compatible:
@@ -23,6 +23,7 @@ properties:
        - mediatek,mt8173-dpi
        - mediatek,mt8183-dpi
        - mediatek,mt8192-dpi
+      - mediatek,mt8195-dpintf
reg:
      maxItems: 1
@@ -54,7 +55,7 @@ properties:
      $ref: /schemas/graph.yaml#/properties/port
      description:
        Output port node. This port should be connected to the input port of an
-      attached HDMI or LVDS encoder chip.
+      attached HDMI, LVDS or DisplayPort encoder chip.
required:
    - compatible



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux