The bridge ops are specific to the bridge configuration, move them into tc_probe_edp_bridge_endpoint() to permit cleaner addition of DSI-to-DPI mode. No functional change. Reviewed-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> Tested-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> # In both DPI to eDP and DSI to DPI mode. Signed-off-by: Marek Vasut <marex@xxxxxxx> Cc: Jonas Karlman <jonas@xxxxxxxxx> Cc: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx> Cc: Maxime Ripard <maxime@xxxxxxxxxx> Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx> Cc: Sam Ravnborg <sam@xxxxxxxxxxxx> --- V2: - New patch V3: - No change V4: - Add RB/TB from Lucas V5: - No change --- drivers/gpu/drm/bridge/tc358767.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index 8a8b495aa0ad1..8c468f77618d2 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -1613,6 +1613,11 @@ static int tc_probe_edp_bridge_endpoint(struct tc_data *tc) tc->bridge.type = DRM_MODE_CONNECTOR_DisplayPort; } + tc->bridge.funcs = &tc_edp_bridge_funcs; + if (tc->hpd_pin >= 0) + tc->bridge.ops |= DRM_BRIDGE_OP_DETECT; + tc->bridge.ops |= DRM_BRIDGE_OP_EDID; + return ret; } @@ -1742,11 +1747,6 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id) if (ret) return ret; - tc->bridge.funcs = &tc_edp_bridge_funcs; - if (tc->hpd_pin >= 0) - tc->bridge.ops |= DRM_BRIDGE_OP_DETECT; - tc->bridge.ops |= DRM_BRIDGE_OP_EDID; - tc->bridge.of_node = dev->of_node; drm_bridge_add(&tc->bridge); -- 2.35.1
