Re: [PATCH v12 3/6] dt-bindings: display: Add Loongson display controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





在 2022/3/27 12:38, Sui Jingfeng 写道:
Add DT bindings and simple usages for Loongson display controller
found in LS7A1000 bridges chip and LS2k1000 SoC.

Signed-off-by: Sui Jingfeng <15330273260@xxxxxx>
[...]
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    bus {
+
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <2>;
+
+        display-controller@6,1 {
+            compatible = "loongson,ls7a1000-dc";
+            reg = <0x3100 0x0 0x0 0x0 0x0>;
+            interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            i2c@6 {
+                compatible = "loongson,gpio-i2c";
+                reg = <0x00001650 0x00000020>;
Hi Jingfeng,

Thanks for your patch.

Just curious about what is this "reg" for?
+                loongson,nr = <6>;
Why nr start from 6?

The approach you are handling I2C seems to be wired..

Actually you can reference how network subsystem is handling
MDIO controller built-in into Ethernet controller [1] in this case. It is
basically the same problem.

[1]: https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/net/snps,dwmac.yaml

Thanks.
- Jiaxun

+                loongson,sda = <0>;
+                loongson,scl = <1>;
+                loongson,udelay = <5>;
+                loongson,timeout = <2200>;
+            };
+
+            i2c@7 {
+                compatible = "loongson,gpio-i2c";
+                reg = <0x00001650 0x00000020>;
+                loongson,nr = <7>;
+                loongson,sda = <2>;
+                loongson,scl = <3>;
+                loongson,udelay = <5>;
+                loongson,timeout = <2200>;
+            };
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    endpoint {
+                            remote-endpoint = <&vga_encoder_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                            remote-endpoint = <&dvi_encoder_in>;
+                    };
+                };
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    bus {
+
+        #address-cells = <3>;
+        #size-cells = <2>;
+        #interrupt-cells = <2>;
+
+        display-controller@6,0 {
+            compatible = "loongson,ls2k1000-dc";
+            reg = <0x3100 0x0 0x0 0x0 0x0>;
+            interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                port@0 {
+                    reg = <0>;
+                    endpoint {
+                            remote-endpoint = <&panel_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    endpoint {
+                            remote-endpoint = <&hdmi_encoder_in>;
+                    };
+                };
+            };
+        };
+    };
+...




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux