Re: [REPOST PATCH v4 06/13] drm/msm/disp/dpu1: Add DSC support in hw_ctl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17-02-22, 23:20, Marijn Suijten wrote:
> On 2022-02-10 16:04:16, Vinod Koul wrote:
> > Later gens of hardware have DSC bits moved to hw_ctl, so configure these
> > bits so that DSC would work there as well
> > 
> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> > Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 11 ++++++++++-
> >  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h |  2 ++
> >  2 files changed, 12 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> > index 02da9ecf71f1..49659165cea8 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> > @@ -25,6 +25,8 @@
> >  #define   CTL_MERGE_3D_ACTIVE           0x0E4
> >  #define   CTL_INTF_ACTIVE               0x0F4
> >  #define   CTL_MERGE_3D_FLUSH            0x100
> > +#define   CTL_DSC_ACTIVE                0x0E8
> > +#define   CTL_DSC_FLUSH                0x104
> >  #define   CTL_INTF_FLUSH                0x110
> >  #define   CTL_INTF_MASTER               0x134
> >  #define   CTL_FETCH_PIPE_ACTIVE         0x0FC
> > @@ -34,6 +36,7 @@
> >  
> >  #define DPU_REG_RESET_TIMEOUT_US        2000
> >  #define  MERGE_3D_IDX   23
> > +#define  DSC_IDX        22
> 
> This define does not seem used in any of these patches.  Is that
> intended?

This should used in the below case you pointed, updated now

> >  static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
> > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> > index 806c171e5df2..9847c9c46d6f 100644
> > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> > @@ -40,6 +40,7 @@ struct dpu_hw_stage_cfg {
> >   * @merge_3d:              3d merge block used
> >   * @intf_mode_sel:         Interface mode, cmd / vid
> >   * @stream_sel:            Stream selection for multi-stream interfaces
> > + * @dsc:                   DSC BIT masks
> 
> Bit masks of what?  Enabled DSCs?  A more verbose doc-comment is desired
> here, matching the rest of the fields :) - something like "DSC block(s)
> used" similar to merge_3d?  Or copy the docs from `dsc_mask`, which is
> the value that is written into this field.

Updated

-- 
~Vinod



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux