Quoting Doug Anderson (2022-03-23 21:47:17)
> Hi,
>
> On Thu, Mar 17, 2022 at 6:13 AM Kieran Bingham
> <kieran.bingham+renesas@xxxxxxxxxxxxxxxx> wrote:
> >
> > @@ -1241,9 +1350,32 @@ static int ti_sn_bridge_probe(struct auxiliary_device *adev,
> > pdata->bridge.type = pdata->next_bridge->type == DRM_MODE_CONNECTOR_DisplayPort
> > ? DRM_MODE_CONNECTOR_DisplayPort : DRM_MODE_CONNECTOR_eDP;
> >
> > - if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort)
> > + if (pdata->bridge.type == DRM_MODE_CONNECTOR_DisplayPort) {
> > pdata->bridge.ops = DRM_BRIDGE_OP_EDID;
> >
> > + if (!pdata->no_hpd)
> > + pdata->bridge.ops |= DRM_BRIDGE_OP_DETECT;
> > + }
> > +
> > + if (!pdata->no_hpd && pdata->irq > 0) {
> > + ret = devm_request_threaded_irq(pdata->dev, pdata->irq, NULL,
> > + ti_sn65dsi86_irq_handler,
> > + IRQF_ONESHOT, "sn65dsi86-irq",
> > + pdata);
> > + if (ret)
> > + return dev_err_probe(pdata->dev, ret,
> > + "Failed to register DP interrupt\n");
> > +
> > + /* Enable IRQ based HPD */
> > + pdata->bridge.ops |= DRM_BRIDGE_OP_HPD;
> > +
> > + /*
> > + * Keep the IRQ disabled initially. It will only be enabled when
> > + * requested through ti_sn_bridge_hpd_enable().
> > + */
> > + disable_irq(pdata->irq);
>
> Instead, I think you should use `IRQF_NO_AUTOEN` which makes sure that
> no matter what the state of the hardware is your IRQ won't fire
> "early". ...and, of course, it saves a line of code. ;-)
>
> Other than that this looks nice to me now so feel free to add my
Aha, thanks, - didn't realise I could do that. I'll remove the
disable_irq, and move the coment above devm_request_threaded_irq, it
still makes sense there with the flag.
I believe I've got the format handling solved on the NO_CONNECTOR patch
from Rob/Sam, so I'm just waiting for some spare cycles to get back and
clean up - and repost the whole of this work as a new series,
incorporating Sam, Rob and Laurent's work with this on top.
--
Kieran
> Reviewed-by tag after the above is fixed.
>
> -Doug
