On Tue, Mar 22, 2022 at 4:02 PM Xin Ji <xji@xxxxxxxxxxxxxxxx> wrote:
>
> As downstream sink was set into standby mode while bridge disabled,
> this patch used for setting downstream sink into normal status
> while enable bridge.
>
> Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx>
> Reviewed-by: Pin-Yen Lin <treapking@xxxxxxxxxxxx>
>
> ---
> V1 -> V2: use dev_dbg replace of dev_info
> ---
> drivers/gpu/drm/bridge/analogix/anx7625.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index 9a2a19ad4202..dcf3275a00fe 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -924,12 +924,20 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
> {
> int ret;
> struct device *dev = &ctx->client->dev;
> + u8 data;
>
> if (!ctx->display_timing_valid) {
> DRM_DEV_ERROR(dev, "mipi not set display timing yet.\n");
> return;
> }
>
> + dev_dbg(dev, "set downstream sink into normal\n");
> + /* Downstream sink enter into normal mode */
> + data = 1;
> + ret = anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data);
> + if (ret < 0)
> + dev_err(dev, "IO error : set sink into normal mode fail\n");
> +
The driver uses DRM_DEV_* for logs. Can we use this?
> /* Disable HDCP */
> anx7625_write_and(ctx, ctx->i2c.rx_p1_client, 0xee, 0x9f);
>
> --
> 2.25.1
>
