Hi, On Thu, Mar 10, 2022 at 7:22 AM Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx> wrote: > > Implement support for non eDP connectors on the TI-SN65DSI86 bridge, and > provide IRQ based hotplug detect to identify when the connector is > present. > > no-hpd is extended to be the default behaviour for non DisplayPort > connectors. > > This series is based upon Sam Ravnborgs and Rob Clarks series [0] to > support DRM_BRIDGE_STATE_OPS and NO_CONNECTOR support on the SN65DSI86, > however some extra modifications have been made on the top of Sam's > series to fix compile breakage and the NO_CONNECTOR support. This confused me a little bit. As far as I know Rob's series is abandoned and he's not working on it. I assume that Sam will eventually re-post his series, but it had unsolved problems and the bpp solution he had totally didn't work because nobody was setting "output_bus_cfg.format" [1]. Did you solve that? ...or you're just going to let your patches sit there and hope that Sam will solve the problem and re-post his series? I'll admit I didn't go through your git tree to figure out if you solved it some way. If you did, I would have assumed you'd have re-posted his patches in your series w/ the solution... [1] https://lore.kernel.org/r/CAD=FV=WW6HWLOD9AzTpjwva9UHY=AR+LABEWqJQznz6Nbb4sOw@xxxxxxxxxxxxxx/ -Doug
