On 3/9/22 13:56, Geert Uytterhoeven wrote:
> On Wed, Mar 9, 2022 at 2:57 AM Chen-Yu Tsai <wens@xxxxxxxxxx> wrote:
>> From: Chen-Yu Tsai <wens@xxxxxxxx>
>>
>> The SSD130x's command to toggle COM scan direction uses bit 3 and only
>> bit 3 to set the direction of the scanout. The driver has an incorrect
>> GENMASK(3, 2), causing the setting to be set on bit 2, rendering it
>> ineffective.
>>
>> Fix the mask to only bit 3, so that the requested setting is applied
>> correctly.
>>
>> Fixes: a61732e80867 ("drm: Add driver for Solomon SSD130x OLED displays")
>> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
>
> Thanks, this fixes the vertically-mirrored display on my Adafruit
> FeatherWing 128x32 OLED.
> Tested-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> Reviewed-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
>
Thanks for the testing and review. I've pushed both patches to drm-misc-next.
--
Best regards,
Javier Martinez Canillas
Linux Engineering
Red Hat
