[PATCH v2 4/4] dt-bindings: display/panel: Add Leadtek ltk035c5444t

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add binding for the leadtek ltk035c5444t, which is a 640x480
mipi-dbi over spi / 24-bit RGB panel based on the newvision
NV03052C chipset.

It is found in the Anbernic RG350M mips handheld.

Signed-off-by: Christophe Branchereau <cbranchereau@xxxxxxxxx>
---
 .../panel/leadtek,ltk035c5444t-spi.yaml       | 59 +++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t-spi.yaml

diff --git a/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t-spi.yaml b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t-spi.yaml
new file mode 100644
index 000000000000..9b6f1810adab
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/leadtek,ltk035c5444t-spi.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/leadtek,ltk035c5444t-spi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Leadtek ltk035c5444t 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+  - Paul Cercueil <paul@xxxxxxxxxxxxxxx>
+  - Christophe Branchereau <cbranchereau@xxxxxxxxx>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: leadtek,ltk035c5444t-spi
+
+  backlight: true
+  port: true
+  power-supply: true
+  reg: true
+  reset-gpios: true
+
+required:
+  - compatible
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "leadtek,ltk035c5444t-spi";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
-- 
2.34.1




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux