Re: [PATCH v16 1/4] drm/bridge: dw-hdmi: introduce dw_hdmi_enable_poll()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Neil,

> Am 03.03.2022 um 17:23 schrieb Neil Armstrong <narmstrong@xxxxxxxxxxxx>:
> 
> Hi,
> 
> On 26/02/2022 18:12, H. Nikolaus Schaller wrote:
>> so that specialization drivers like ingenic-dw-hdmi can enable polling.
>> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
>> ---
>>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 9 +++++++++
>>  include/drm/bridge/dw_hdmi.h              | 1 +
>>  2 files changed, 10 insertions(+)
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> index 4befc104d2200..43e375da131e8 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> @@ -3217,6 +3217,15 @@ static int dw_hdmi_parse_dt(struct dw_hdmi *hdmi)
>>  	return 0;
>>  }
>>  +void dw_hdmi_enable_poll(struct dw_hdmi *hdmi, bool enable)
>> +{
>> +	if (hdmi->bridge.dev)
>> +		hdmi->bridge.dev->mode_config.poll_enabled = enable;
>> +	else
>> +		dev_warn(hdmi->dev, "no hdmi->bridge.dev");
>> +}
>> +EXPORT_SYMBOL_GPL(dw_hdmi_enable_poll);
>> +
>>  struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
>>  			      const struct dw_hdmi_plat_data *plat_data)
>>  {
>> diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
>> index 2a1f85f9a8a3f..963960794b40e 100644
>> --- a/include/drm/bridge/dw_hdmi.h
>> +++ b/include/drm/bridge/dw_hdmi.h
>> @@ -196,5 +196,6 @@ enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
>>  void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
>>  			    bool force, bool disabled, bool rxsense);
>>  void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data);
>> +void dw_hdmi_enable_poll(struct dw_hdmi *hdmi, bool enable);
>>    #endif /* __IMX_HDMI_H__ */
> 
> As I understand, this is because the IRQ line of the dw-hdmi IP isn't connected right ? and you use the display-connector ddc gpio instead ?

Yes. The IRQ line is not connected on all boards as far as I can see.

> 
> In this case I think the Ingenic DRM core should call drm_kms_helper_poll_init(drm) instead.

Ah, that is good. it seems to do "dw_hdmi_enable_poll()" in a more generic way.

Will test and rework for v17 asap.

BR and thanks,
Nikolaus





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux