Re: [PATCH v7 10/24] drm/rockchip: dw_hdmi: Add support for hclk

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 01, 2022 at 01:39:31PM +0000, Robin Murphy wrote:
> On 2022-02-28 14:19, Sascha Hauer wrote:
> > On Fri, Feb 25, 2022 at 02:11:54PM +0100, Sascha Hauer wrote:
> > > On Fri, Feb 25, 2022 at 12:41:23PM +0000, Robin Murphy wrote:
> > > > On 2022-02-25 11:10, Dmitry Osipenko wrote:
> > > > > 25.02.2022 13:49, Sascha Hauer пишет:
> > > > > > On Fri, Feb 25, 2022 at 01:26:14PM +0300, Dmitry Osipenko wrote:
> > > > > > > 25.02.2022 10:51, Sascha Hauer пишет:
> > > > > > > > The rk3568 HDMI has an additional clock that needs to be enabled for the
> > > > > > > > HDMI controller to work. The purpose of that clock is not clear. It is
> > > > > > > > named "hclk" in the downstream driver, so use the same name.
> > > > > > > > 
> > > > > > > > Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> > > > > > > > ---
> > > > > > > > 
> > > > > > > > Notes:
> > > > > > > >       Changes since v5:
> > > > > > > >       - Use devm_clk_get_optional rather than devm_clk_get
> > > > > > > > 
> > > > > > > >    drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 16 ++++++++++++++++
> > > > > > > >    1 file changed, 16 insertions(+)
> > > > > > > > 
> > > > > > > > diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > > > > > > > index fe4f9556239ac..c6c00e8779ab5 100644
> > > > > > > > --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > > > > > > > +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> > > > > > > > @@ -76,6 +76,7 @@ struct rockchip_hdmi {
> > > > > > > >    	const struct rockchip_hdmi_chip_data *chip_data;
> > > > > > > >    	struct clk *ref_clk;
> > > > > > > >    	struct clk *grf_clk;
> > > > > > > > +	struct clk *hclk_clk;
> > > > > > > >    	struct dw_hdmi *hdmi;
> > > > > > > >    	struct regulator *avdd_0v9;
> > > > > > > >    	struct regulator *avdd_1v8;
> > > > > > > > @@ -229,6 +230,14 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
> > > > > > > >    		return PTR_ERR(hdmi->grf_clk);
> > > > > > > >    	}
> > > > > > > > +	hdmi->hclk_clk = devm_clk_get_optional(hdmi->dev, "hclk");
> > > > > > > > +	if (PTR_ERR(hdmi->hclk_clk) == -EPROBE_DEFER) {
> > > > > > > 
> > > > > > > Have you tried to investigate the hclk? I'm still thinking that's not
> > > > > > > only HDMI that needs this clock and then the hardware description
> > > > > > > doesn't look correct.
> > > > > > 
> > > > > > I am still not sure what you mean. Yes, it's not only the HDMI that
> > > > > > needs this clock. The VOP2 needs it as well and the driver handles that.
> > > > > 
> > > > > I'm curious whether DSI/DP also need that clock to be enabled. If they
> > > > > do, then you aren't modeling h/w properly AFAICS.
> > > > 
> > > > Assuming nobody at Rockchip decided to make things needlessly inconsistent
> > > > with previous SoCs, HCLK_VOP should be the clock for the VOP's AHB slave
> > > > interface. Usually, if that affected anything other than accessing VOP
> > > > registers, indeed it would smell of something being wrong in the clock tree,
> > > > but in this case I'd also be suspicious of whether it might have ended up
> > > > clocking related GRF registers as well (either directly, or indirectly via
> > > > some gate that the clock driver hasn't modelled yet).
> > > 
> > > Ok, I am beginning to understand. I verified that hdmi, mipi and dp are
> > > hanging when HCLK_VOP is disabled by disabling that clock via sysfs
> > > using CLOCK_ALLOW_WRITE_DEBUGFS. When it's disabled then the registers
> > > of that units can't be accessed. However, when I disable HCLK_VOP by
> > > directly writing to the gate bit RK3568_CLKGATE_CON(20) then only
> > > accessing VOP registers hangs, the other units stay functional.
> > > So it seems it must be the parent clock which must be enabled. The
> > > parent clock is hclk_vo. This clock should be handled as part of the
> > > RK3568_PD_VO power domain:
> > > 
> > > 	power-domain@RK3568_PD_VO {
> > >                  reg = <RK3568_PD_VO>;
> > >                  clocks = <&cru HCLK_VO>,
> > >                           <&cru PCLK_VO>,
> > >                           <&cru ACLK_VOP_PRE>;
> > >                   pm_qos = <&qos_hdcp>,
> > >                            <&qos_vop_m0>,
> > >                            <&qos_vop_m1>;
> > >                   #power-domain-cells = <0>;
> > >          };
> > 
> > Forget this. The clocks in this node are only enabled during enabling or
> > disabling the power domain, they are disabled again immediately afterwards.
> > 
> > OK, I need HCLK_VO to access the HDMI registers. I verified that by
> > disabling HCLK_VO at register level (CRU_GATE_CON(20) BIT(1)). The
> > HDMI registers become inaccessible then. This means I'll replace
> > HCLK_VOP in the HDMI node with HCLK_VO. Does this sound sane?
> 
> Well, it's still a mystery hack overall, and in some ways it seems even more
> suspect to be claiming a whole branch of the clock tree rather than a leaf
> gate with a specific purpose. I'm really starting to think that the
> underlying issue here is a bug in the clock driver, or a hardware mishap
> that should logically be worked around by the clock driver, rather than
> individual the consumers.
> 
> Does it work if you hack the clock driver to think that PCLK_VO is a child
> of HCLK_VO? Even if that's not technically true, it would seem to
> effectively match the observed behaviour (i.e. all 3 things whose register
> access apparently *should* be enabled by a gate off PCLK_VO, seem to also
> require HCLK_VO).

Yes, that works as expected. I am not sure though if we really want to
go that path. The pclk rates will become completely bogus with this and
should we have to play with the rates in the future we might regret this
step.

Sascha


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux