Re: [PATCH v1,2/3] drm/mediatek: Add TOPCKGEN select mux control dpi_clk

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 25/02/22 10:53, xinlei.lee@xxxxxxxxxxxx ha scritto:
From: Xinlei Lee <xinlei.lee@xxxxxxxxxxxx>

Dpi_clk is controlled by the mux selected
by TOPCKGEN and APMIXEDSYS can support small resolution.

Signed-off-by: Xinlei Lee <xinlei.lee@xxxxxxxxxxxx>

Hello Xinlei,

as it was pointed out by reviewers in the MT8195 DisplayPort series, that is
adding the same logic that you are proposing in this patch, the clock parent
selection should be performed by the clock drivers, I'd say in the callback
.set_rate_and_parent(), and not by the mtk_dpi driver.

Please fix this in the proper drivers (clocks!) instead.

Thanks,
Angelo

---
  drivers/gpu/drm/mediatek/mtk_dpi.c | 38 ++++++++++++++++++++++++++----
  1 file changed, 34 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 4554e2de1430..bad686817e29 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -63,6 +63,14 @@ enum mtk_dpi_out_color_format {
  	MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL
  };
+enum TVDPLL_CLK {
+	TVDPLL_PLL = 0,
+	TVDPLL_D2 = 2,
+	TVDPLL_D4 = 4,
+	TVDPLL_D8 = 8,
+	TVDPLL_D16 = 16,
+};
+
  struct mtk_dpi {
  	struct drm_encoder encoder;
  	struct drm_bridge bridge;
@@ -73,6 +81,7 @@ struct mtk_dpi {
  	struct clk *engine_clk;
  	struct clk *pixel_clk;
  	struct clk *tvd_clk;
+	struct clk *pclk_src[5];
  	int irq;
  	struct drm_display_mode mode;
  	const struct mtk_dpi_conf *conf;
@@ -459,6 +468,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
  	struct videomode vm = { 0 };
  	unsigned long pll_rate;
  	unsigned int factor;
+	struct clk *clksrc = NULL;
/* let pll_rate can fix the valid range of tvdpll (1G~2GHz) */
  	factor = dpi->conf->cal_factor(mode->clock);
@@ -473,11 +483,26 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
vm.pixelclock = pll_rate / factor;
  	if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
-	    (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE))
-		clk_set_rate(dpi->pixel_clk, vm.pixelclock * 2);
-	else
-		clk_set_rate(dpi->pixel_clk, vm.pixelclock);
+	    (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE)) {
+		if (factor == 8)
+			clksrc = dpi->pclk_src[2];
+		else if (factor == 4)
+			clksrc = dpi->pclk_src[1];
+		else
+			clksrc = dpi->pclk_src[1];
+		}
+	else {
+		if (factor == 8)
+			clksrc = dpi->pclk_src[3];
+		else if (factor == 4)
+			clksrc = dpi->pclk_src[2];
+		else
+			clksrc = dpi->pclk_src[2];
+	}
+ clk_prepare_enable(dpi->pixel_clk);
+	clk_set_parent(dpi->pixel_clk, clksrc);
+	clk_disable_unprepare(dpi->pixel_clk);
vm.pixelclock = clk_get_rate(dpi->pixel_clk); @@ -893,6 +918,11 @@ static int mtk_dpi_probe(struct platform_device *pdev)
  		return ret;
  	}
+ dpi->pclk_src[1] = devm_clk_get_optional(dev, "tvdpll_d2");
+	dpi->pclk_src[2] = devm_clk_get_optional(dev, "tvdpll_d4");
+	dpi->pclk_src[3] = devm_clk_get_optional(dev, "tvdpll_d8");
+	dpi->pclk_src[4] = devm_clk_get_optional(dev, "tvdpll_d16");
+
  	dpi->irq = platform_get_irq(pdev, 0);
  	if (dpi->irq <= 0)
  		return -EINVAL;




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux