[PATCH 5/5] arm64: dts: qcom: sm8250: Drop flags for mdss irqs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The number of interrupt cells for the mdss interrupt controller is 1,
meaning there should only be one cell for the interrupt number, not two.
Drop the second cell containing (unused) irq flags.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index fdaf303ba047..956848068871 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3200,7 +3200,7 @@ mdss_mdp: mdp@ae01000 {
 				power-domains = <&rpmhpd SM8250_MMCX>;
 
 				interrupt-parent = <&mdss>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0>;
 
 				ports {
 					#address-cells = <1>;
@@ -3252,7 +3252,7 @@ dsi0: dsi@ae94000 {
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <4>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
@@ -3325,7 +3325,7 @@ dsi1: dsi@ae96000 {
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <5>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
-- 
2.34.1




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux