Re: [Intel-gfx] [PATCH 2/2] hda/i915: split the wait for the component binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thu, 24 Feb 2022, Ramalingam C wrote:

> Split the wait for component binding from i915 in multiples of
> sysctl_hung_task_timeout_secs. This helps to avoid the possible kworker
> thread hung detection given below.

while I understand the problem, I'm not sure whether a simpler option
should be chosen. Maybe just split the wait_for_completion_timeout()
into small 5sec iterations, without consulting value of hung_task_timeout.
This would seem unligned with more mainstream use of 
wait_for_completion_timeout() in kernel and still do the job.

I'll loop in Takashi here as well. Basicly the 60 sec timeout in 
hda/hdac_i915.c is getting caught by hung_task_detection logic in builds
where the hung_task_timeout is below 60secs.

I have a patch that tries to avoid hitting the timeout in some of the more 
common cases:
"ALSA: hda/i915 - skip acomp init if no matching display"
https://lists.freedesktop.org/archives/intel-gfx-trybot/2022-February/128278.html
... but we'll still be stuck with some configurations where the timeout 
will be hit. And above needs careful testing.

One logic comment below as well, but I'll quote the whole patch to give
context to Takashi.
 
> <3>[   60.946316] INFO: task kworker/11:1:104 blocked for more than 30
> seconds.
> <3>[   60.946479]       Tainted: G        W
> 5.17.0-rc5-CI-CI_DRM_11265+ #1
> <3>[   60.946580] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
> disables this message.
> <6>[   60.946688] task:kworker/11:1    state:D stack:14192 pid:  104
> ppid:     2 flags:0x00004000
> <6>[   60.946713] Workqueue: events azx_probe_work [snd_hda_intel]
> <6>[   60.946740] Call Trace:
> <6>[   60.946745]  <TASK>
> <6>[   60.946763]  __schedule+0x42c/0xa80
> <6>[   60.946797]  schedule+0x3f/0xc0
> <6>[   60.946811]  schedule_timeout+0x1be/0x2e0
> <6>[   60.946829]  ? del_timer_sync+0xb0/0xb0
> <6>[   60.946849]  ? 0xffffffff81000000
> <6>[   60.946864]  ? wait_for_completion_timeout+0x79/0x120
> <6>[   60.946879]  wait_for_completion_timeout+0xab/0x120
> <6>[   60.946906]  snd_hdac_i915_init+0xa5/0xb0 [snd_hda_core]
> <6>[   60.946943]  azx_probe_work+0x71/0x84c [snd_hda_intel]
> <6>[   60.946974]  process_one_work+0x275/0x5c0
> <6>[   60.947010]  worker_thread+0x37/0x370
> <6>[   60.947028]  ? process_one_work+0x5c0/0x5c0
> <6>[   60.947038]  kthread+0xef/0x120
> <6>[   60.947047]  ? kthread_complete_and_exit+0x20/0x20
> <6>[   60.947065]  ret_from_fork+0x22/0x30
> <6>[   60.947110]  </TASK>
> 
> Signed-off-by: Ramalingam C <ramalingam.c@xxxxxxxxx>
> cc: Kai Vehmanen <kai.vehmanen@xxxxxxxxx>
> cc: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
> ---
>  sound/hda/hdac_i915.c | 17 ++++++++++++++---
>  1 file changed, 14 insertions(+), 3 deletions(-)
> 
> diff --git a/sound/hda/hdac_i915.c b/sound/hda/hdac_i915.c
> index d20a450a9a15..daaeebc5099e 100644
> --- a/sound/hda/hdac_i915.c
> +++ b/sound/hda/hdac_i915.c
> @@ -6,6 +6,7 @@
>  #include <linux/init.h>
>  #include <linux/module.h>
>  #include <linux/pci.h>
> +#include <linux/sched/sysctl.h>
>  #include <sound/core.h>
>  #include <sound/hdaudio.h>
>  #include <sound/hda_i915.h>
> @@ -163,7 +164,8 @@ static bool dg1_gfx_present(void)
>  int snd_hdac_i915_init(struct hdac_bus *bus)
>  {
>  	struct drm_audio_component *acomp;
> -	int err;
> +	unsigned long timeout, ret = 0;
> +	int err, i, itr_cnt;
>  
>  	if (!i915_gfx_present())
>  		return -ENODEV;
> @@ -182,9 +184,18 @@ int snd_hdac_i915_init(struct hdac_bus *bus)
>  	if (!acomp->ops) {
>  		if (!IS_ENABLED(CONFIG_MODULES) ||
>  		    !request_module("i915")) {
5~> +			if (!sysctl_hung_task_timeout_secs) {
> +				itr_cnt = 1;
> +				timeout = msecs_to_jiffies(60 * 1000);
> +			} else {
> +				itr_cnt = DIV_ROUND_UP(60, sysctl_hung_task_timeout_secs);
> +				timeout = msecs_to_jiffies(sysctl_hung_task_timeout_secs * 1000);
> +			}
> +
>  			/* 60s timeout */
> -			wait_for_completion_timeout(&acomp->master_bind_complete,
> -						    msecs_to_jiffies(30 * 1000));
> +			for (i = 0; i < itr_cnt || !ret; i++)
> +				ret = wait_for_completion_timeout(&acomp->master_bind_complete,
> +								  timeout);

I think that should be 'i < itr_cnt && !ret'. If wait_for_completion
returns with a positive value, we should stop waiting as the completion
has been signalled.

>  		}
>  	}
>  	if (!acomp->ops) {
> -- 

Br, Kai



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux