Re: [RFC PATCH v2 4/5] drm/msm/dp: replace dp_connector with drm_bridge_connector

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2/23/2022 1:33 PM, Stephen Boyd wrote:
Quoting Kuogee Hsieh (2022-02-23 10:27:26)
On 2/23/2022 10:22 AM, Dmitry Baryshkov wrote:
On 23/02/2022 20:21, Kuogee Hsieh wrote:

In the panel device node.

Can you please share it too?

&soc {
          edp_power_supply: edp_power {
                  compatible = "regulator-fixed";
                  regulator-name = "edp_backlight_power";

                  regulator-always-on;
                  regulator-boot-on;
          };

          edp_backlight: edp_backlight {
                  compatible = "pwm-backlight";

                  pwms = <&pm8350c_pwm 3 65535>;
                  power-supply = <&edp_power_supply>;
                  enable-gpio = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;

                  pinctrl-names = "default";
                  pinctrl-0 = <&backlight_pwm_default>;
          };

          edp_panel: edp_panel {
                  compatible = "sharp_lq140m1jw46";
Is that supposed to be sharp,lq140m1jw46 with a comma instead of an
underscore?

Stephen,

This is our internal branch which does not have patches up to date yet.

I will cherry-pick newer edp related patches which are under review now to re test it.




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux