Re: [Intel-gfx] [PATCH 1/3] drm/i915/guc: Limit scheduling properties to avoid overflow

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 23/02/2022 02:11, John Harrison wrote:
On 2/22/2022 01:52, Tvrtko Ursulin wrote:
On 18/02/2022 21:33, John.C.Harrison@xxxxxxxxx wrote:
From: John Harrison <John.C.Harrison@xxxxxxxxx>

GuC converts the pre-emption timeout and timeslice quantum values into
clock ticks internally. That significantly reduces the point of 32bit
overflow. On current platforms, worst case scenario is approximately

Where does 32-bit come from, the GuC side? We already use 64-bits so that something to fix to start with. Yep...
Yes, the GuC API is defined as 32bits only and then does a straight multiply by the clock speed with no range checking. We have requested 64bit support but there was push back on the grounds that it is not something the GuC timer hardware supports and such long timeouts are not real world usable anyway.

As long as compute are happy with 100 seconds, then it "should be enough for everbody". :D


./gt/uc/intel_guc_fwif.h:       u32 execution_quantum;

./gt/uc/intel_guc_submission.c: desc->execution_quantum = engine->props.timeslice_duration_ms * 1000;

./gt/intel_engine_types.h:              unsigned long timeslice_duration_ms;

timeslice_store/preempt_timeout_store:
err = kstrtoull(buf, 0, &duration);

So both kconfig and sysfs can already overflow GuC, not only because of tick conversion internally but because at backend level nothing was done for assigning 64-bit into 32-bit. Or I failed to find where it is handled.
That's why I'm adding this range check to make sure we don't allow overflows.

Yes and no, this fixes it, but the first bug was not only due GuC internal tick conversion. It was present ever since the u64 from i915 was shoved into u32 sent to GuC. So even if GuC used the value without additional multiplication, bug was be there. My point being when GuC backend was added timeout_ms values should have been limited/clamped to U32_MAX. The tick discovery is additional limit on top.

110 seconds. Rather than allowing the user to set higher values and
then get confused by early timeouts, add limits when setting these
values.

Btw who is reviewing GuC patches these days - things have somehow gotten pretty quiet in activity and I don't think that's due absence of stuff to improve or fix? Asking since I think I noticed a few already which you posted and then crickets on the mailing list.
Too much work to do and not enough engineers to do it all :(.



Signed-off-by: John Harrison <John.C.Harrison@xxxxxxxxx>
---
  drivers/gpu/drm/i915/gt/intel_engine_cs.c   | 15 +++++++++++++++
  drivers/gpu/drm/i915/gt/sysfs_engines.c     | 14 ++++++++++++++
  drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h |  9 +++++++++
  3 files changed, 38 insertions(+)

diff --git a/drivers/gpu/drm/i915/gt/intel_engine_cs.c b/drivers/gpu/drm/i915/gt/intel_engine_cs.c
index e53008b4dd05..2a1e9f36e6f5 100644
--- a/drivers/gpu/drm/i915/gt/intel_engine_cs.c
+++ b/drivers/gpu/drm/i915/gt/intel_engine_cs.c
@@ -389,6 +389,21 @@ static int intel_engine_setup(struct intel_gt *gt, enum intel_engine_id id,
      if (GRAPHICS_VER(i915) == 12 && engine->class == RENDER_CLASS)
          engine->props.preempt_timeout_ms = 0;
  +    /* Cap timeouts to prevent overflow inside GuC */
+    if (intel_guc_submission_is_wanted(&gt->uc.guc)) {
+        if (engine->props.timeslice_duration_ms > GUC_POLICY_MAX_EXEC_QUANTUM_MS) {

Hm "wanted".. There's been too much back and forth on the GuC load options over the years to keep track.. intel_engine_uses_guc work sounds like would work and read nicer.
I'm not adding a new feature check here. I'm just using the existing one. If we want to rename it yet again then that would be a different patch set.

$ grep intel_engine_uses_guc . -rl
./i915_perf.c
./i915_request.c
./selftests/intel_scheduler_helpers.c
./gem/i915_gem_context.c
./gt/intel_context.c
./gt/intel_engine.h
./gt/intel_engine_cs.c
./gt/intel_engine_heartbeat.c
./gt/intel_engine_pm.c
./gt/intel_reset.c
./gt/intel_lrc.c
./gt/selftest_context.c
./gt/selftest_engine_pm.c
./gt/selftest_hangcheck.c
./gt/selftest_mocs.c
./gt/selftest_workarounds.c

Sounds better to me than intel_guc_submission_is_wanted. What does the reader know whether "is wanted" translates to "is actually used". Shrug on "is wanted".

And limit to class instead of applying to all engines looks like a miss.
As per follow up email, the class limit is not applied here.


+ drm_info(&engine->i915->drm, "Warning, clamping timeslice duration to %d to prevent possibly overflow\n",
+                 GUC_POLICY_MAX_EXEC_QUANTUM_MS);
+            engine->props.timeslice_duration_ms = GUC_POLICY_MAX_EXEC_QUANTUM_MS;

I am not sure logging such message during driver load is useful. Sounds more like a confused driver which starts with one value and then overrides itself. I'd just silently set the value appropriate for the active backend. Preemption timeout kconfig text already documents the fact timeouts can get overriden at runtime depending on platform+engine. So maybe just add same text to timeslice kconfig.
The point is to make people aware if they compile with unsupported config options. As far as I know, there is no way to apply range checking or other limits to config defines. Which means that a user would silently get unwanted behaviour. That seems like a bad thing to me. If the driver is confused because the user built it in a confused manner then we should let them know.

Okay, but I think make it notice low level.

Also consider in patch 3/3 when you triple it, and then clamp back down here. That's even more confused state since tripling gets nerfed. I think that's also an argument to always account preempt timeout in heartbeat interval calculation. Haven't got to your reply on 2/3 yet though..


+        }
+
+        if (engine->props.preempt_timeout_ms > GUC_POLICY_MAX_PREEMPT_TIMEOUT_MS) { +            drm_info(&engine->i915->drm, "Warning, clamping pre-emption timeout to %d to prevent possibly overflow\n",
+                 GUC_POLICY_MAX_PREEMPT_TIMEOUT_MS);
+            engine->props.preempt_timeout_ms = GUC_POLICY_MAX_PREEMPT_TIMEOUT_MS;
+        }
+    }
+
      engine->defaults = engine->props; /* never to change again */
        engine->context_size = intel_engine_context_size(gt, engine->class); diff --git a/drivers/gpu/drm/i915/gt/sysfs_engines.c b/drivers/gpu/drm/i915/gt/sysfs_engines.c
index 967031056202..f57efe026474 100644
--- a/drivers/gpu/drm/i915/gt/sysfs_engines.c
+++ b/drivers/gpu/drm/i915/gt/sysfs_engines.c
@@ -221,6 +221,13 @@ timeslice_store(struct kobject *kobj, struct kobj_attribute *attr,
      if (duration > jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT))
          return -EINVAL;
  +    if (intel_uc_uses_guc_submission(&engine->gt->uc) &&
+        duration > GUC_POLICY_MAX_EXEC_QUANTUM_MS) {
+        duration = GUC_POLICY_MAX_EXEC_QUANTUM_MS;
+        drm_info(&engine->i915->drm, "Warning, clamping timeslice duration to %lld to prevent possibly overflow\n",
+             duration);
+    }

I would suggest to avoid duplicated clamping logic. Maybe hide the all backend logic into the helpers then, like maybe:

  d = intel_engine_validate_timeslice/preempt_timeout(engine, duration);
  if (d != duration)
    return -EINVAL:

Returning -EINVAL would be equivalent to existing behaviour:

    if (duration > jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT))
        return -EINVAL;

That way userspace has explicit notification and read-back is identical to written in value. From engine setup you can just call the helper silently.
Sure, EINVAL rather than clamping works as well. And can certainly add helper wrappers. But as above, I don't like the idea of silently disregarding a user specified config option.

Deal - with the open of heartbeat interval TBD.



+
      WRITE_ONCE(engine->props.timeslice_duration_ms, duration);
        if (execlists_active(&engine->execlists))
@@ -325,6 +332,13 @@ preempt_timeout_store(struct kobject *kobj, struct kobj_attribute *attr,
      if (timeout > jiffies_to_msecs(MAX_SCHEDULE_TIMEOUT))
          return -EINVAL;
  +    if (intel_uc_uses_guc_submission(&engine->gt->uc) &&
+        timeout > GUC_POLICY_MAX_PREEMPT_TIMEOUT_MS) {
+        timeout = GUC_POLICY_MAX_PREEMPT_TIMEOUT_MS;
+        drm_info(&engine->i915->drm, "Warning, clamping pre-emption timeout to %lld to prevent possibly overflow\n",
+             timeout);
+    }
+
      WRITE_ONCE(engine->props.preempt_timeout_ms, timeout);
        if (READ_ONCE(engine->execlists.pending[0]))
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h b/drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h
index 6a4612a852e2..ad131092f8df 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_fwif.h
@@ -248,6 +248,15 @@ struct guc_lrc_desc {
    #define GLOBAL_POLICY_DEFAULT_DPC_PROMOTE_TIME_US 500000
  +/*
+ * GuC converts the timeout to clock ticks internally. Different platforms have + * different GuC clocks. Thus, the maximum value before overflow is platform + * dependent. Current worst case scenario is about 110s. So, limit to 100s to be
+ * safe.
+ */
+#define GUC_POLICY_MAX_EXEC_QUANTUM_MS        (100 * 1000)
+#define GUC_POLICY_MAX_PREEMPT_TIMEOUT_MS    (100 * 1000)

Most important question -
how will we know/notice if/when new GuC arrives where these timeouts would still overflow? Can this be queried somehow at runtime or where does the limit comes from? How is GuC told about it? Set in some field and it just allows too large values silently break things?
Currently, we don't notice except by debugging peculiar test failures :(.

These limits are not in any GuC spec. Indeed, it took a while to actually work out why increasing the value actually caused shorter timeouts to occur! As above, there is no range checking inside GuC itself. It does a truncated multiply which results in an effectively random number and just happily uses it.

I will agree with what Daniele said - push on GuC fw folks to document the max values they guarantee to support in the interface spec. Otherwise it is too fragile.

Regards,

Tvrtko



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux