Re: [v1] arm64/dts/qcom/sc7280: update mdp clk to max supported value to support higher refresh rates

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Feb 22, 2022 at 12:58 PM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
>
> Quoting Vinod Polimera (2022-02-21 05:12:06)
> > Panels with higher refresh rate will need mdp clk above 300Mhz.
> > Select max frequency for mdp clock during bootup, dpu driver will
> > scale down the clock as per usecase when first update from the framework is received.
> >
> > Signed-off-by: Vinod Polimera <quic_vpolimer@xxxxxxxxxxx>
>
> Please add a Fixes tag.
>
> > ---
> >  arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > index baf1653..7af96fc 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > @@ -2895,7 +2895,7 @@
> >                                 assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
> >                                                 <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
> >                                                 <&dispcc DISP_CC_MDSS_AHB_CLK>;
> > -                               assigned-clock-rates = <300000000>,
> > +                               assigned-clock-rates = <506666667>,
>
> Why not simply remove the clock assignment and set the rate based on the
> OPP when the driver probes?

I was curious so I dug. It turns out that it _is_ using the OPP. It's
just that the kernel driver currently assumes that the initial rate is
the max rate. :-P You can actually see in msm_dss_parse_clock() that
it walks through each of its clocks at boot and records the boot rate
and stashes it as the "max_rate". That's not a scheme I've seen done
commonly, so if nothing else it deserves a comment in the commit
message.

One other note is that I think there are _two_ places in the dtsi that
are setting this same clock rate, right? The parent node `mdss`, which
you're not touching, and the child `mdss_mdp`, which you are touching.
Seems like you should just do it in one place. If it needs to be done
by the parent then the child could just assume that the clock has
already been set by the parent.

-Doug



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux