Am Montag, den 21.02.2022, 09:29 +0100 schrieb Boris Brezillon: > Hello Christoph, > > On Sat, 19 Feb 2022 09:28:44 +0000 > Christoph Niedermaier <cniedermaier@xxxxxxxxxxxxxxxxxx> wrote: > > > From: Max Krummenacher [mailto:max.oss.09@xxxxxxxxx] > > Sent: Wednesday, February 9, 2022 10:38 AM > > > > If display timings were read from the devicetree using > > > > of_get_display_timing() and pixelclk-active is defined > > > > there, the flag DISPLAY_FLAGS_SYNC_POSEDGE/NEGEDGE is > > > > automatically generated. Through the function > > > > drm_bus_flags_from_videomode() e.g. called in the > > > > panel-simple driver this flag got into the bus flags, > > > > but then in imx_pd_bridge_atomic_check() the bus flag > > > > check failed and will not initialize the display. The > > > > original commit fe141cedc433 does not explain why this > > > > check was introduced. So remove the bus flags check, > > > > because it stops the initialization of the display with > > > > valid bus flags. > > > > > > > > Fixes: fe141cedc433 ("drm/imx: pd: Use bus format/flags provided by the bridge when > > > > available") > > > > Signed-off-by: Christoph Niedermaier <cniedermaier@xxxxxxxxxxxxxxxxxx> > > > > Cc: Marek Vasut <marex@xxxxxxx> > > > > Cc: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx> > > > > Cc: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> > > > > Cc: David Airlie <airlied@xxxxxxxx> > > > > Cc: Daniel Vetter <daniel@xxxxxxxx> > > > > Cc: Shawn Guo <shawnguo@xxxxxxxxxx> > > > > Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> > > > > Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx> > > > > Cc: Fabio Estevam <festevam@xxxxxxxxx> > > > > Cc: NXP Linux Team <linux-imx@xxxxxxx> > > > > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > > > > To: dri-devel@xxxxxxxxxxxxxxxxxxxxx > > > > --- > > > > V2: - Add Boris to the Cc list > > > > --- > > > > drivers/gpu/drm/imx/parallel-display.c | 8 -------- > > > > 1 file changed, 8 deletions(-) > > > > > > > > diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c > > > > index a8aba0141ce7..06cb1a59b9bc 100644 > > > > --- a/drivers/gpu/drm/imx/parallel-display.c > > > > +++ b/drivers/gpu/drm/imx/parallel-display.c > > > > @@ -217,14 +217,6 @@ static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge, > > > > if (!imx_pd_format_supported(bus_fmt)) > > > > return -EINVAL; > > > > > > > > - if (bus_flags & > > > > - ~(DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_DE_HIGH | > > > > - DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE | > > > > - DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)) { > > > > - dev_warn(imxpd->dev, "invalid bus_flags (%x)\n", bus_flags); > > > > - return -EINVAL; > > > > - } > > > > - > > > > bridge_state->output_bus_cfg.flags = bus_flags; > > > > bridge_state->input_bus_cfg.flags = bus_flags; > > > > imx_crtc_state->bus_flags = bus_flags; > > > > > > Tested on a Colibri iMX6DL with a panel-dpi based panel. > > > > > > Tested-by: Max Krummenacher <max.krummenacher@xxxxxxxxxxx> > > > > I still ask myself why this bus flag check is in the code. > > Is there a reason not to remove that? > > The reasoning was that DE_{LOW,HIGH} and > FLAG_PIXDATA_DRIVE_{POS,NEG}EDGE were the only bus_flags taken into > account by the crtc logic, so anything else is simply ignored. This was > definitely wrong since the driver supports at least one of the VSYNC > polarity (perhaps both if there's a way to configure it that's not > hooked-up yet). > > So I guess figuring out the default VSYNC polarity and accepting the > according DISPLAY_FLAGS_SYNC_XXXEDGE flag is what makes most sense here. Note that {HV}SYNC polarities are taken from the timings '.flag' field The bus_flags do not carry that information. (drivers/gpu/ipu-v3/ipu-di.c:611: if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH)) The new flags DRM_BUS_FLAG_SYNC_DRIVE_{POS,NEG}EDGE are siblings to DRM_BUS_FLAG_PIXDATA_DRIVE_{POS,NEG}EDGE and would allow to specify on which pixelclock edge the sync signals are to be driven. Before that addition it was implicitly assumed that the sync signals and data signals would be driven on the same clock edge. The way I read the IPU driver it is not foreseen that the data lines and sync lines are driven by a different clock edge. I personally would just drop the sanity test on bus_flags. This is what this patch proposes. Regards, Max > > Regards, > > Boris
