Hi Am 18.02.22 um 17:04 schrieb Michal Suchanek:
Since switch to simplefb/simpledrm VESA graphic modes are no longer
available with legacy BIOS.
The x86 realmode boot code enables the VESA graphic modes when option
FB_BOOT_VESA_SUPPORT is enabled.
To enable use of VESA modes with simplefb in legacy BIOS boot mode drop
dependency of BOOT_VESA_SUPPORT on FB, also drop the FB_ prefix, and
select the option when simplefb enabled on x86.
The BOOT_VESA_SUPPORT is not specific to framebuffer but rather to x86
platform, move it from fbdev to x86 Kconfig.
Fixes: e3263ab389a7 ("x86: provide platform-devices for boot-framebuffers")
Signed-off-by: Michal Suchanek <msuchanek@xxxxxxx>
Acked-by: Thomas Zimmermann <tzimmermann@xxxxxxx>Thanks for the patch. I'll wait a bit for additional reviews before merging it.
Best regards Thomas
--- v2: Select BOOT_VESA_SUPPORT from simplefb rather than simpledrm. The simpledrm driver uses the firmware provided video modes only indirectly through simplefb, and both can be enabled independently. v3: Move BOOT_VESA_SUPPORT from fbdev to x86 --- arch/x86/Kconfig | 6 ++++++ arch/x86/boot/video-vesa.c | 4 ++-- drivers/firmware/Kconfig | 1 + drivers/video/fbdev/Kconfig | 13 +++---------- 4 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 9f5bd41bf660..cceb1aab0486 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -942,6 +942,12 @@ config GART_IOMMUIf unsure, say Y. +config BOOT_VESA_SUPPORT+ bool + help + If true, at least one selected framebuffer driver can take advantage + of VESA video modes set at an early boot stage via the vga= parameter. + config MAXSMP bool "Enable Maximum number of SMP Processors and NUMA Nodes" depends on X86_64 && SMP && DEBUG_KERNEL diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c index 7e185977a984..c2c6d35e3a43 100644 --- a/arch/x86/boot/video-vesa.c +++ b/arch/x86/boot/video-vesa.c @@ -83,7 +83,7 @@ static int vesa_probe(void) (vminfo.memory_layout == 4 || vminfo.memory_layout == 6) && vminfo.memory_planes == 1) { -#ifdef CONFIG_FB_BOOT_VESA_SUPPORT +#ifdef CONFIG_BOOT_VESA_SUPPORT /* Graphics mode, color, linear frame buffer supported. Only register the mode if if framebuffer is configured, however, @@ -121,7 +121,7 @@ static int vesa_set_mode(struct mode_info *mode) if ((vminfo.mode_attr & 0x15) == 0x05) { /* It's a supported text mode */ is_graphic = 0; -#ifdef CONFIG_FB_BOOT_VESA_SUPPORT +#ifdef CONFIG_BOOT_VESA_SUPPORT } else if ((vminfo.mode_attr & 0x99) == 0x99) { /* It's a graphics mode with linear frame buffer */ is_graphic = 1; diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 75cb91055c17..ad64f3a6f54f 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -224,6 +224,7 @@ config SYSFB config SYSFB_SIMPLEFB bool "Mark VGA/VBE/EFI FB as generic system framebuffer" depends on SYSFB + select BOOT_VESA_SUPPORT help Firmwares often provide initial graphics framebuffers so the BIOS, bootloader or kernel can show basic video-output during boot for diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index 6ed5e608dd04..5bdd303b5268 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -66,13 +66,6 @@ config FB_DDC select I2C_ALGOBIT select I2C-config FB_BOOT_VESA_SUPPORT- bool - depends on FB - help - If true, at least one selected framebuffer driver can take advantage - of VESA video modes set at an early boot stage via the vga= parameter. - config FB_CFB_FILLRECT tristate depends on FB @@ -627,7 +620,7 @@ config FB_VESA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_BOOT_VESA_SUPPORT + select BOOT_VESA_SUPPORT help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. @@ -1051,7 +1044,7 @@ config FB_INTEL select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_BOOT_VESA_SUPPORT if FB_INTEL = y + select BOOT_VESA_SUPPORT if FB_INTEL = y depends on !DRM_I915 help This driver supports the on-board graphics built in to the Intel @@ -1378,7 +1371,7 @@ config FB_SIS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - select FB_BOOT_VESA_SUPPORT if FB_SIS = y + select BOOT_VESA_SUPPORT if FB_SIS = y select FB_SIS_300 if !FB_SIS_315 help This is the frame buffer device driver for the SiS 300, 315, 330
-- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Maxfeldstr. 5, 90409 Nürnberg, Germany (HRB 36809, AG Nürnberg) Geschäftsführer: Ivo Totev
Attachment:
OpenPGP_signature
Description: OpenPGP digital signature
