Re: [PATCH v7 3/4] drm/msm/dpu: replace BIT(x) with correspond marco define string

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17/02/2022 01:05, Kuogee Hsieh wrote:
To improve code readability, this patch replace BIT(x) with
correspond register bit define string

Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>

This patch should come first.

---
  drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 16 +++++++++++-----
  1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
index b68e696..8f10aab 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
@@ -61,6 +61,12 @@
#define INTF_MUX 0x25C +#define INTF_CFG_ACTIVE_H_EN BIT(29)
+#define INTF_CFG_ACTIVE_V_EN    BIT(30)
+
+#define INTF_CFG2_DATABUS_WIDEN BIT(0)
+#define INTF_CFG2_DATA_HCTL_EN  BIT(4)
+
  static const struct dpu_intf_cfg *_intf_offset(enum dpu_intf intf,
  		const struct dpu_mdss_cfg *m,
  		void __iomem *addr,
@@ -139,13 +145,13 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
if (active_h_end) {
  		active_hctl = (active_h_end << 16) | active_h_start;
-		intf_cfg |= BIT(29);
+		intf_cfg |= INTF_CFG_ACTIVE_H_EN;
  	} else {
  		active_hctl = 0;
  	}
if (active_v_end)
-		intf_cfg |= BIT(30);
+		intf_cfg |= INTF_CFG_ACTIVE_V_EN;
hsync_ctl = (hsync_period << 16) | p->hsync_pulse_width;
  	display_hctl = (hsync_end_x << 16) | hsync_start_x;
@@ -156,7 +162,7 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
  	 * if compression is enabled in 1 pixel per clock mode
  	 */
  	if (p->wide_bus_en)
-		intf_cfg2 |=  (BIT(0) | BIT(4));
+		intf_cfg2 |= (INTF_CFG2_DATABUS_WIDEN | INTF_CFG2_DATA_HCTL_EN);
data_width = p->width; @@ -178,8 +184,8 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *ctx,
  		active_hctl = (active_h_end << 16) | active_h_start;
  		display_hctl = active_hctl;
- intf_cfg |= BIT(29);
-		intf_cfg |= BIT(30);
+		intf_cfg |= INTF_CFG_ACTIVE_H_EN;
+		intf_cfg |= INTF_CFG_ACTIVE_V_EN;
  	}
den_polarity = 0;


--
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux