On 16-02-22, 19:44, Abhinav Kumar wrote: > > > On 2/10/2022 2:34 AM, Vinod Koul wrote: > > When DSC is enabled, we need to configure DSI registers accordingly and > > configure the respective stream compression registers. > > > > Add support to calculate the register setting based on DSC params and > > timing information and configure these registers. > > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> > > Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx> > > --- > > drivers/gpu/drm/msm/dsi/dsi.xml.h | 10 +++ > > drivers/gpu/drm/msm/dsi/dsi_host.c | 109 ++++++++++++++++++++++++++++- > > 2 files changed, 118 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h > > index 49b551ad1bff..c1c85df58c4b 100644 > > --- a/drivers/gpu/drm/msm/dsi/dsi.xml.h > > +++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h > > @@ -706,4 +706,14 @@ static inline uint32_t DSI_VERSION_MAJOR(uint32_t val) > > #define REG_DSI_CPHY_MODE_CTRL 0x000002d4 > > +#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL 0x0000029c > > + > > +#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL2 0x000002a0 > > + > > +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL 0x000002a4 > > + > > +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2 0x000002a8 > > + > > +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL3 0x000002ac > > + > > This file should not be edited manually. The updates have to be generated > using the headergen tool. I have already send mesa patch for that. https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14967#note_1253974 You should chime in there as well :) I will split these and get these generated one as a separate patch.. > > > #endif /* DSI_XML */ > > diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c > > index 438c80750682..3d8d5a1daaa3 100644 > > --- a/drivers/gpu/drm/msm/dsi/dsi_host.c > > +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c > > @@ -908,6 +908,20 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable, > > dsi_write(msm_host, REG_DSI_CPHY_MODE_CTRL, BIT(0)); > > } > > +static int dsi_dsc_update_pic_dim(struct msm_display_dsc_config *dsc, > > + int pic_width, int pic_height) > > +{ > > + if (!dsc || !pic_width || !pic_height) { > > + pr_err("DSI: invalid input: pic_width: %d pic_height: %d\n", pic_width, pic_height); > > + return -EINVAL; > > + } > > + > > + dsc->drm->pic_width = pic_width; > > + dsc->drm->pic_height = pic_height; > > + > > + return 0; > > +} > > + > > static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi) > > { > > struct drm_display_mode *mode = msm_host->mode; > > @@ -940,7 +954,68 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi) > > hdisplay /= 2; > > } > > + if (msm_host->dsc) { > > + struct msm_display_dsc_config *dsc = msm_host->dsc; > > + > > + /* update dsc params with timing params */ > > + dsi_dsc_update_pic_dim(dsc, mode->hdisplay, mode->vdisplay); > > + DBG("Mode Width- %d x Height %d\n", dsc->drm->pic_width, dsc->drm->pic_height); > > + > > + /* we do the calculations for dsc parameters here so that > > + * panel can use these parameters > > + */ > > + dsi_populate_dsc_params(dsc); > > + > > + /* Divide the display by 3 but keep back/font porch and > > + * pulse width same > > + */ > > + h_total -= hdisplay; > > + hdisplay /= 3; > > + h_total += hdisplay; > > + ha_end = ha_start + hdisplay; > > + } > > + > > if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) { > > + if (msm_host->dsc) { > > + struct msm_display_dsc_config *dsc = msm_host->dsc; > > + u32 reg, intf_width, slice_per_intf; > > + u32 total_bytes_per_intf; > > + > > + /* first calculate dsc parameters and then program > > + * compress mode registers > > + */ > > + intf_width = hdisplay; > > + slice_per_intf = DIV_ROUND_UP(intf_width, dsc->drm->slice_width); > > + > > + dsc->drm->slice_count = 1; > > Why is this hard-coded to 1 here? Am i missing something? > I think I need another day to look into these calculations. Thanks for spotting this, it should be: dsc->drm->slice_count = DIV_ROUND_UP(intf_width, dsc->drm->slice_widths); which is slice_per_intf so I will update this -- ~Vinod
