On Fri, Feb 04, 2022 at 12:29:39AM +0800, Sui Jingfeng wrote: > > > +static int lsdc_modeset = 1; > > > +MODULE_PARM_DESC(modeset, "Enable/disable CMA-based KMS(1 = enabled(default), 0 = disabled)"); > > > +module_param_named(modeset, lsdc_modeset, int, 0644); > > > + > > > +static int lsdc_cached_coherent = 1; > > > +MODULE_PARM_DESC(cached_coherent, "uss cached coherent mapping(1 = enabled(default), 0 = disabled)"); > > > +module_param_named(cached_coherent, lsdc_cached_coherent, int, 0644); > > > + > > > +static int lsdc_dirty_update = -1; > > > +MODULE_PARM_DESC(dirty_update, "enable dirty update(1 = enabled, 0 = disabled(default))"); > > > +module_param_named(dirty_update, lsdc_dirty_update, int, 0644); > > > + > > > +static int lsdc_use_vram_helper = -1; > > > +MODULE_PARM_DESC(use_vram_helper, "use vram helper based solution(1 = enabled, 0 = disabled(default))"); > > > +module_param_named(use_vram_helper, lsdc_use_vram_helper, int, 0644); > > > + > > > +static int lsdc_verbose = -1; > > > +MODULE_PARM_DESC(verbose, "Enable/disable print some key information"); > > > +module_param_named(verbose, lsdc_verbose, int, 0644); > > > > It's not really clear to me why you need any of those parameters. Why > > would a user want to use a non coherent mapping for example? > > > Because we are Mips architecture. Paul Cercueil already explained it > in his mmap GEM buffers cachedpatch <https://lkml.kernel.org/lkml/20200822164233.71583-1-paul@xxxxxxxxxxxxxxx/T/>. I drag part of it to here for > convenient to reading: > > /Traditionally, GEM buffers are mapped write-combine. Writes to the buffer > are accelerated, and reads are slow. Application doing lots////of > alpha-blending paint inside shadow buffers, which is then memcpy'd////into > the final GEM buffer./// > "non coherent mapping" is actually cached and it is for CMA helpers > base driver, not for VRAM helper based driver. For Loongson CPU/SoCs. > The cache coherency is maintained by hardware, therefore there no > need to worry about coherency problems. This is true at least for > ls3a3000, ls3a4000 and ls3a5000. > > "non coherent" or "coherent" is not important here, the key point is > that the backing memory of the framebuffer is cached with non coherent > mapping, you don't need a shadow buffer layer when using X server's > modesetting driver. > > Read and write to the framebuffer in system memory is much faster than > read and write to the framebuffer in the VRAM. > > Why CMA helper based solution is faster than the VRAM based solution on Mips platform? > > Partly because of the CPU have L1, L2 and L3 cache, especially L3 cache > is as large as 8MB, read and write from the cache is fast. > > Another reason is as Paul Cercueil said, read from VRAM with write-combine > cache mode is slow. it is just uncache read. > Please note that we don't have a GPU here, we are just a display controller. > > For the VRAM helper based driver case, the backing memory of the framebuffer > is located at VRAM, When using X server's modesetting driver, we have to enable > the ShadowFB option, Uncache acceleration support(at the kernel size) should > also be enabled. Otherwise the performance of graphic application is just slow. > > Beside write-combine cache mode have bugs on our platform, a kernel side > developer have disabled it. Write-combine cache mode just boil down to uncached > now. See [1] and [2] > > [1]https://lkml.org/lkml/2020/8/10/255 > [2]https://lkml.kernel.org/lkml/1617701112-14007-1-git-send-email-yangtiezhu@xxxxxxxxxxx/T/ > > This is the reason why we prefer CMA helper base solution with non coherent mapping, > simply because it is fast. > > As far as I know, Loongson's CPU does not has the concept of write-combine, > it only support three caching mode: uncached, cached and uncache acceleration. > write-combine is implemented with uncache acceleration on Mips. My point wasn't just about the VRAM vs CMA stuff, it was about why do you need all those switches in the first place? Take the verbose parameter for example: it's entirely redundant with the already existing, documented, DRM logging infrastructure. Then, you have "modeset", and I'm not sure why it's supposed to be there, at all. This is a modesetting driver, why would I want to disable modesetting entirely? More fundamentally (and this extends to the CMA, caching and VRAM stuff you explained above), why can't the driver pick the right decision all the time and why would that be under the user control? You were mentioning that you need to work-around MIPS memory management. Then fine, just do that on MIPS, and don't it on the other architectures that don't need it. There's no need for a knob. Maxime
Attachment:
signature.asc
Description: PGP signature
