Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- drivers/gpu/drm/panel/panel-ilitek-ili9322.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9322.c b/drivers/gpu/drm/panel/panel-ilitek-ili9322.c index 8e84df9a0033..c7a980fd6406 100644 --- a/drivers/gpu/drm/panel/panel-ilitek-ili9322.c +++ b/drivers/gpu/drm/panel/panel-ilitek-ili9322.c @@ -935,6 +935,19 @@ static const struct of_device_id ili9322_of_match[] = { }; MODULE_DEVICE_TABLE(of, ili9322_of_match); +static const struct spi_device_id ili9322_spi_ids[] = { + { + .name = "dir-685-panel", + .driver_data = (kernel_ulong_t)&ili9322_dir_685, + }, + { + .name = "ili9322", + .driver_data = 0, + }, + { } +}; +MODULE_DEVICE_TABLE(spi, ili9322_spi_ids); + static struct spi_driver ili9322_driver = { .probe = ili9322_probe, .remove = ili9322_remove, @@ -942,6 +955,7 @@ static struct spi_driver ili9322_driver = { .name = "panel-ilitek-ili9322", .of_match_table = ili9322_of_match, }, + .id_table = ili9322_spi_ids, }; module_spi_driver(ili9322_driver); -- 2.30.2