Our code is doing the same clock rate validation in multiple instances. Let's create a helper to share the rate validation. Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx> --- drivers/gpu/drm/vc4/vc4_hdmi.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c index d79a70bae7f2..1b75e8cfd5d5 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -1262,6 +1262,19 @@ static void vc4_hdmi_encoder_atomic_mode_set(struct drm_encoder *encoder, mutex_unlock(&vc4_hdmi->mutex); } +static enum drm_mode_status +vc4_hdmi_encoder_clock_valid(const struct vc4_hdmi *vc4_hdmi, + unsigned long long clock) +{ + if (clock > vc4_hdmi->variant->max_pixel_clock) + return MODE_CLOCK_HIGH; + + if (vc4_hdmi->disable_4kp60 && clock > HDMI_14_MAX_TMDS_CLK) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + #define WIFI_2_4GHz_CH1_MIN_FREQ 2400000000ULL #define WIFI_2_4GHz_CH1_MAX_FREQ 2422000000ULL @@ -1305,10 +1318,7 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder, if (mode->flags & DRM_MODE_FLAG_DBLCLK) pixel_rate = pixel_rate * 2; - if (pixel_rate > vc4_hdmi->variant->max_pixel_clock) - return -EINVAL; - - if (vc4_hdmi->disable_4kp60 && (pixel_rate > HDMI_14_MAX_TMDS_CLK)) + if (vc4_hdmi_encoder_clock_valid(vc4_hdmi, pixel_rate) != MODE_OK) return -EINVAL; vc4_state->pixel_rate = pixel_rate; @@ -1327,13 +1337,7 @@ vc4_hdmi_encoder_mode_valid(struct drm_encoder *encoder, (mode->hsync_end % 2) || (mode->htotal % 2))) return MODE_H_ILLEGAL; - if ((mode->clock * 1000) > vc4_hdmi->variant->max_pixel_clock) - return MODE_CLOCK_HIGH; - - if (vc4_hdmi->disable_4kp60 && vc4_hdmi_mode_needs_scrambling(mode)) - return MODE_CLOCK_HIGH; - - return MODE_OK; + return vc4_hdmi_encoder_clock_valid(vc4_hdmi, mode->clock * 1000); } static const struct drm_encoder_helper_funcs vc4_hdmi_encoder_helper_funcs = { -- 2.34.1