2013/1/10 Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>:
> Hi Vikas,
>
> Thank you for the patch.
>
> On Friday 04 January 2013 10:24:04 Vikas Sajjan wrote:
>> On 3 January 2013 16:29, Tomasz Figa <t.figa@xxxxxxxxxxx> wrote:
>> > On Wednesday 02 of January 2013 18:47:22 Vikas C Sajjan wrote:
>> >> From: Vikas Sajjan <vikas.sajjan@xxxxxxxxxx>
>> >>
>> >> Signed-off-by: Vikas Sajjan <vikas.sajjan@xxxxxxxxxx>
>> >> ---
>> >>
>> >> include/video/display.h | 6 ++++++
>> >> 1 file changed, 6 insertions(+)
>> >>
>> >> diff --git a/include/video/display.h b/include/video/display.h
>> >> index b639fd0..fb2f437 100644
>> >> --- a/include/video/display.h
>> >> +++ b/include/video/display.h
>> >> @@ -117,6 +117,12 @@ struct dsi_video_source_ops {
>> >>
>> >> void (*enable_hs)(struct video_source *src, bool enable);
>> >>
>> >> + /* frame related */
>> >> + int (*get_frame_done)(struct video_source *src);
>> >> + int (*clear_frame_done)(struct video_source *src);
>> >> + int (*set_early_blank_mode)(struct video_source *src, int power);
>> >> + int (*set_blank_mode)(struct video_source *src, int power);
>> >> +
>> >
>> > I'm not sure if all those extra ops are needed in any way.
>> >
>> > Looking and Exynos MIPI DSIM driver, set_blank_mode is handling only
>> > FB_BLANK_UNBLANK status, which basically equals to the already existing
>> > enable operation, while set_early_blank mode handles only
>> > FB_BLANK_POWERDOWN, being equal to disable callback.
>>
>> Right, exynos_mipi_dsi_blank_mode() only supports FB_BLANK_UNBLANK as
>> of now, but FB_BLANK_NORMAL will be supported in future.
>> If not for Exynos, i think it will be need for other SoCs which
>> support FB_BLANK_UNBLANK and FB_BLANK_NORMAL.
>
> Could you please explain in a bit more details what the set_early_blank_mode
> and set_blank_mode operations do ?
>
>> > Both get_frame_done and clear_frame_done do not look at anything used at
>> > the moment and if frame done status monitoring will be ever needed, I
>> > think a better way should be implemented.
>>
>> You are right, as of now Exynos MIPI DSI Panels are NOT using these
>> callbacks, but as you mentioned we will need frame done status monitoring
>> anyways, so i included these callbacks here. Will check, if we can implement
>> any better method.
>
> Do you expect the entity drivers (and in particular the panel drivers) to
> require frame done notification ? If so, could you explain your use case(s) ?
>
Hi Laurent,
As you know, there are two types of MIPI-DSI based lcd panels, RGB and
CPU mode. In case of CPU mode lcd panel, it has its own framebuffer
internally and the image in the framebuffer is transferred on lcd
panel in 60Hz itself. But for this, there is something we should
consider. The display controller with CPU mode doens't transfer image
data to MIPI-DSI controller itself. So we should set trigger bit of
the display controller to 1 to do it and also check whether the data
transmission in the framebuffer is done on lcd panel to avoid tearing
issue and some confliction issue(A) between read and write operations
like below,
lcd_panel_frame_done_interrrupt_handler()
{
...
if (mipi-dsi frame done)
trigger display controller;
...
}
A. the issue that LCD panel can access its own framebuffer while some
new data from MIPI-DSI controller is being written in the framebuffer.
But I think there might be better way to avoid such thing.
Thanks,
Inki Dae
> --
> Regards,
>
> Laurent Pinchart
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
