Re: [Patch v4 18/24] drm/amdkfd: CRIU checkpoint and restore xnack mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2022-01-05 10:22 a.m., philip yang wrote:


On 2021-12-22 7:37 p.m., Rajneesh Bhardwaj wrote:
Recoverable page faults are represented by the xnack mode setting inside
a kfd process and are used to represent the device page faults. For CR,
we don't consider negative values which are typically used for querying
the current xnack mode without modifying it.

Signed-off-by: Rajneesh Bhardwaj<rajneesh.bhardwaj@xxxxxxx>
---
  drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 15 +++++++++++++++
  drivers/gpu/drm/amd/amdkfd/kfd_priv.h    |  1 +
  2 files changed, 16 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
index 178b0ccfb286..446eb9310915 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c
@@ -1845,6 +1845,11 @@ static int criu_checkpoint_process(struct kfd_process *p,
  	memset(&process_priv, 0, sizeof(process_priv));
process_priv.version = KFD_CRIU_PRIV_VERSION;
+	/* For CR, we don't consider negative xnack mode which is used for
+	 * querying without changing it, here 0 simply means disabled and 1
+	 * means enabled so retry for finding a valid PTE.
+	 */
Negative value to query xnack mode is for kfd_ioctl_set_xnack_mode user space ioctl interface, which is not used by CRIU, I think this comment is misleading,
+	process_priv.xnack_mode = p->xnack_enabled ? 1 : 0;
change to process_priv.xnack_enabled
ret = copy_to_user(user_priv_data + *priv_offset,
  				&process_priv, sizeof(process_priv));
@@ -2231,6 +2236,16 @@ static int criu_restore_process(struct kfd_process *p,
  		return -EINVAL;
  	}
+ pr_debug("Setting XNACK mode\n");
+	if (process_priv.xnack_mode && !kfd_process_xnack_mode(p, true)) {
+		pr_err("xnack mode cannot be set\n");
+		ret = -EPERM;
+		goto exit;
+	} else {

On GFXv9 GPUs except Aldebaran, this means the process checkpointed is xnack off, it can restore and resume on GPU with xnack on, then shader will continue running successfully, but driver is not guaranteed to map svm ranges on GPU all the time, if retry fault happens, the shader will not recover. Maybe change to:

If (KFD_GC_VERSION(dev) != IP_VERSION(9, 4, 2) {

The code here was correct. The xnack mode applies to the whole process, not just one GPU. The logic for checking the capabilities of all GPUs is already in kfd_process_xnack_mode. If XNACK cannot be supported by all GPUs, restoring a non-0 XNACK mode will fail.

Any GPU can run in XNACK-disabled mode. So we don't need any limitations for process_priv.xnack_enabled == 0.

Regards,
  Felix


    if (process_priv.xnack_enabled != kfd_process_xnack_mode(p, true)) {

             pr_err("xnack mode cannot be set\n");

             ret = -EPERM;

             goto exit;

    }

}

pr_debug("set xnack mode: %d\n", process_priv.xnack_enabled);

p->xnack_enabled = process_priv.xnack_enabled;


+		pr_debug("set xnack mode: %d\n", process_priv.xnack_mode);
+		p->xnack_enabled = process_priv.xnack_mode;
+	}
+
  exit:
  	return ret;
  }
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
index 855c162b85ea..d72dda84c18c 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
@@ -1057,6 +1057,7 @@ void kfd_process_set_trap_handler(struct qcm_process_device *qpd,
struct kfd_criu_process_priv_data {
  	uint32_t version;
+	uint32_t xnack_mode;

bool xnack_enabled;

Regards,

Philip

  };
struct kfd_criu_device_priv_data {



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux