Re: [v1 1/2] dt-bindings: msm/dsi: Add 10nm dsi phy tuning properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 30 Dec 2021 at 12:25, Rajeev Nandan <quic_rajeevny@xxxxxxxxxxx> wrote:
>
> Add 10nm dsi phy tuning properties for phy drive strength and
> phy drive level adjustemnt.
>
> Signed-off-by: Rajeev Nandan <quic_rajeevny@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/display/msm/dsi-phy-10nm.yaml | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
> index 4399715..9406982 100644
> --- a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
> @@ -35,6 +35,18 @@ properties:
>        Connected to DSI0_MIPI_DSI_PLL_VDDA0P9 pin for sc7180 target and
>        connected to VDDA_MIPI_DSI_0_PLL_0P9 pin for sdm845 target
>
> +  phy-drive-strength-cfg:
> +    type: array
> +    description:
> +      Register values of DSIPHY_RESCODE_OFFSET_TOP and DSIPHY_RESCODE_OFFSET_BOT
> +      for all five lanes to adjust the phy drive strength.
> +
> +  phy-drive-level-cfg:
> +    type: array
> +    description:
> +      Register values of DSIPHY_RESCODE_OFFSET_TOP for all five lanes to adjust
> +      phy drive level/amplitude.


Description is incorrect, it's not the RESCODE_OFFSET_TOP register.

> +
>  required:
>    - compatible
>    - reg
> @@ -64,5 +76,12 @@ examples:
>           clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
>                    <&rpmhcc RPMH_CXO_CLK>;
>           clock-names = "iface", "ref";
> +
> +         phy-drive-strength-cfg = [00 00
> +                                   00 00
> +                                   00 00
> +                                   00 00
> +                                   00 00];
> +         phy-drive-level-cfg = [59 59 59 59 59];

You are writing this value into the PHY_CMN_VREG_CTRL register. So
specifying 5 values here does not make sense.

>       };
>  ...
> --
> 2.7.4
>


-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux