Hi,
Patches 1 and 2 added to drm-misc-next.
I'll pick the rest when the regulator situation is sorted out.
Cheers,
-Paul
Le jeu., déc. 2 2021 at 19:39:45 +0100, H. Nikolaus Schaller
<hns@xxxxxxxxxxxxx> a écrit :
PATCH V11 2021-12-02 19:39:52:
- patch 4/8: change devm_regulator_get_optional to devm_regulator_get
and
remove NULL check (requested by broonie@xxxxxxxxxx)
- patch 3/8: make hdmi-5v-supply required (requested by
broonie@xxxxxxxxxx)
PATCH V10 2021-11-30 22:26:41:
- patch 3/8: fix $id and $ref paths (found by robh@xxxxxxxxxx)
PATCH V9 2021-11-24 22:29:14:
- patch 6/8: remove optional <0> for assigned-clocks and
unintentionally included "unwedge" setup (found by
paul@xxxxxxxxxxxxxxx)
- patch 4/8: some cosmetics
make regulator enable/disable only if not NULL (found by
paul@xxxxxxxxxxxxxxx)
simplify/fix error handling and driver cleanup on remove
(proposed by paul@xxxxxxxxxxxxxxx)
- patch 3/8: fix #include path in example (found by
paul@xxxxxxxxxxxxxxx)
fix missing "i" in unevaluatedProperties (found by
robh@xxxxxxxxxx)
fix 4 spaces indentation for required: property (found
by robh@xxxxxxxxxx)
PATCH V8 2021-11-23 19:14:00:
- fix a bad editing result from patch 2/8 (found by
paul@xxxxxxxxxxxxxxx)
PATCH V7 2021-11-23 18:46:23:
- changed gpio polarity of hdmi_power to 0 (suggested by
paul@xxxxxxxxxxxxxxx)
- fixed LCD1 irq number (bug found by paul@xxxxxxxxxxxxxxx)
- removed "- 4" for calculating max_register (suggested by
paul@xxxxxxxxxxxxxxx)
- use unevaluatedPropertes instead of additionalProperties (suggested
by robh@xxxxxxxxxx)
- moved and renamed ingenic,jz4780-hdmi.yaml (suggested by
robh@xxxxxxxxxx)
- adjusted assigned-clocks changes to upstream which added some for
SSI (by hns@xxxxxxxxxxxxx)
- rebased and tested with v5.16-rc2 + patch set drm/ingenic by
paul@xxxxxxxxxxxxxxx (by hns@xxxxxxxxxxxxx)
PATCH V6 2021-11-10 20:43:33:
- changed CONFIG_DRM_INGENIC_DW_HDMI to "m" (by hns@xxxxxxxxxxxxx)
- made ingenic-dw-hdmi an independent platform driver which can be
compiled as module
and removed error patch fixes for IPU (suggested by
paul@xxxxxxxxxxxxxxx)
- moved assigned-clocks from jz4780.dtsi to ci20.dts (suggested by
paul@xxxxxxxxxxxxxxx)
- fixed reg property in jz4780.dtsi to cover all registers incl.
gamma and vee (by hns@xxxxxxxxxxxxx)
- added a base patch to calculate regmap size from DTS reg property
(requested by paul@xxxxxxxxxxxxxxx)
- restored resetting all bits except one in LCDOSDC (requested by
paul@xxxxxxxxxxxxxxx)
- clarified setting of cpos (suggested by paul@xxxxxxxxxxxxxxx)
- moved bindings definition for ddc-i2c-bus (suggested by
paul@xxxxxxxxxxxxxxx)
- simplified mask definitions for JZ_LCD_DESSIZE (requested by
paul@xxxxxxxxxxxxxxx)
- removed setting alpha premultiplication (suggested by
paul@xxxxxxxxxxxxxxx)
- removed some comments (suggested by paul@xxxxxxxxxxxxxxx)
PATCH V5 2021-10-05 14:28:44:
- dropped mode_fixup and timings support in dw-hdmi as it is no
longer needed in this V5 (by hns@xxxxxxxxxxxxx)
- dropped "drm/ingenic: add some jz4780 specific features"
(stimulated by paul@xxxxxxxxxxxxxxx)
- fixed typo in commit subject: "synopsis" -> "synopsys" (by
hns@xxxxxxxxxxxxx)
- swapped clocks in jz4780.dtsi to match synopsys,dw-hdmi.yaml (by
hns@xxxxxxxxxxxxx)
- improved, simplified, fixed, dtbschecked ingenic-jz4780-hdmi.yaml
and made dependent of bridge/synopsys,dw-hdmi.yaml (based on
suggestions by maxime@xxxxxxxxxx)
- fixed binding vs. driver&DTS use of hdmi-5v regulator (suggested by
maxime@xxxxxxxxxx)
- dropped "drm/bridge: synopsis: Fix to properly handle HPD" - was a
no longer needed workaround for a previous version
(suggested by maxime@xxxxxxxxxx)
PATCH V4 2021-09-27 18:44:38:
- fix setting output_port = 1 (issue found by paul@xxxxxxxxxxxxxxx)
- ci20.dts: convert to use hdmi-connector (by hns@xxxxxxxxxxxxx)
- add a hdmi-regulator to control +5V power (by hns@xxxxxxxxxxxxx)
- added a fix to dw-hdmi to call drm_kms_helper_hotplug_event on
plugin event detection (by hns@xxxxxxxxxxxxx)
- always allocate extended descriptor but initialize only for jz4780
(by hns@xxxxxxxxxxxxx)
- updated to work on top of "[PATCH v3 0/6] drm/ingenic: Various
improvements v3" (by paul@xxxxxxxxxxxxxxx)
- rebased to v5.13-rc3
PATCH V3 2021-08-08 07:10:50:
This series adds HDMI support for JZ4780 and CI20 board (and fixes
one IPU related issue in registration error path)
- [patch 1/8] switched from mode_fixup to atomic_check (suggested by
robert.foss@xxxxxxxxxx)
- the call to the dw-hdmi specialization is still called mode_fixup
- [patch 3/8] diverse fixes for ingenic-drm-drv (suggested by
paul@xxxxxxxxxxxxxxx)
- factor out some non-HDMI features of the jz4780 into a separate
patch
- multiple fixes around max height
- do not change regmap config but a copy on stack
- define some constants
- factor out fixing of drm_init error path for IPU into separate
patch
- use FIELD_PREP()
- [patch 8/8] conversion to component framework dropped (suggested by
Laurent.pinchart@xxxxxxxxxxxxxxxx and paul@xxxxxxxxxxxxxxx)
PATCH V2 2021-08-05 16:08:05:
- code and commit messages revisited for checkpatch warnings
- rebased on v5.14-rc4
- include (failed, hence RFC 8/8) attempt to convert to component
framework
(was suggested by Paul Cercueil <paul@xxxxxxxxxxxxxxx> a while ago)
This series adds HDMI support for JZ4780 and CI20 board
H. Nikolaus Schaller (3):
drm/ingenic: prepare ingenic drm for later addition of JZ4780
MIPS: defconfig: CI20: configure for DRM_DW_HDMI_JZ4780
[RFC] MIPS: DTS: Ingenic: adjust register size to available
registers
Paul Boddie (4):
drm/ingenic: Add support for JZ4780 and HDMI output
drm/ingenic: Add dw-hdmi driver for jz4780
MIPS: DTS: jz4780: Account for Synopsys HDMI driver and LCD
controllers
MIPS: DTS: CI20: Add DT nodes for HDMI setup
Sam Ravnborg (1):
dt-bindings: display: Add ingenic,jz4780-dw-hdmi DT Schema
.../display/bridge/ingenic,jz4780-hdmi.yaml | 78 ++++++++++
.../display/bridge/synopsys,dw-hdmi.yaml | 3 +
arch/mips/boot/dts/ingenic/ci20.dts | 72 +++++++++-
arch/mips/boot/dts/ingenic/jz4725b.dtsi | 2 +-
arch/mips/boot/dts/ingenic/jz4740.dtsi | 2 +-
arch/mips/boot/dts/ingenic/jz4770.dtsi | 2 +-
arch/mips/boot/dts/ingenic/jz4780.dtsi | 40 ++++++
arch/mips/configs/ci20_defconfig | 6 +
drivers/gpu/drm/ingenic/Kconfig | 9 ++
drivers/gpu/drm/ingenic/Makefile | 1 +
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 62 +++++++-
drivers/gpu/drm/ingenic/ingenic-drm.h | 38 +++++
drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c | 136
++++++++++++++++++
13 files changed, 443 insertions(+), 8 deletions(-)
create mode 100644
Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
create mode 100644 drivers/gpu/drm/ingenic/ingenic-dw-hdmi.c
--
2.33.0
