Re: [PATCH 2/3] drm: rcar-du: DRM_RCAR_USE_LVDS should depend on DRM_RCAR_DU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

On Wed, Dec 15, 2021 at 11:47:27AM +0100, Geert Uytterhoeven wrote:
> On Wed, Dec 15, 2021 at 11:30 AM Laurent Pinchart wrote:
> > On Wed, Dec 15, 2021 at 12:23:39PM +0200, Laurent Pinchart wrote:
> > > On Wed, Dec 15, 2021 at 11:17:37AM +0100, Geert Uytterhoeven wrote:
> > > > On Wed, Dec 15, 2021 at 11:12 AM Laurent Pinchart wrote:
> > > > > On Wed, Dec 15, 2021 at 10:27:46AM +0100, Geert Uytterhoeven wrote:
> > > > > > The Renesas R-Car LVDS encoder driver is a subdriver of the R-Car
> > > > > > Display Unit driver, and enabling DRM_RCAR_USE_LVDS while DRM_RCAR_DU is
> > > > > > disabled doesn't have any impact on the kernel built.  Hence add a
> > > > > > dependency on DRM_RCAR_DU, to prevent asking the user about this driver
> > > > > > when configuring a kernel without R-Car Display Unit support, like is
> > > > > > already done for DRM_RCAR_CMM.
> > > > > >
> > > > > > Fixes: 42d95d1b3a9c649b ("drm/rcar: stop using 'imply' for dependencies")
> > > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> > > > > > ---
> > > > > > The problem pre-existed before commit 42d95d1b3a9c649b, as the
> > > > > > dependency of DRM_RCAR_LVDS on DRM_RCAR_DU was accidentally removed
> > > > > > before.
> > > > > > Fixes: c6a27fa41fabb35f ("drm: rcar-du: Convert LVDS encoder code to bridge driver")
> > > > > > ---
> > > > > >  drivers/gpu/drm/rcar-du/Kconfig | 2 +-
> > > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig
> > > > > > index 65d72be50f46f19e..a7aa556e301d1087 100644
> > > > > > --- a/drivers/gpu/drm/rcar-du/Kconfig
> > > > > > +++ b/drivers/gpu/drm/rcar-du/Kconfig
> > > > > > @@ -32,7 +32,7 @@ config DRM_RCAR_DW_HDMI
> > > > > >
> > > > > >  config DRM_RCAR_USE_LVDS
> > > > > >       bool "R-Car DU LVDS Encoder Support"
> > > > > > -     depends on DRM_BRIDGE && OF
> > > > > > +     depends on DRM_BRIDGE && OF && DRM_RCAR_DU
> > > > >
> > > > > Shouldn't the same be done for DRM_RCAR_DW_HDMI ? Even better, we could
> > > >
> > > > DRM_RCAR_DW_HDMI can be enabled and built with CONFIG_COMPILE_TEST=y
> > > > and CONFIG_DRM_RCAR_DU=n (yes I've tried on RISC-V ;-)
> > >
> > > It would seem so indeed, my question is whether that shouldn't be fixed
> > > as well.
> 
> What is there to fix? You can build the HDMI fine without the DU driver,
> when compile-testing.

But it polutes the kernel config by asking a question that is irrelevant
to users who don't have DRM_RCAR_DU enabled. Other patches in this
series address this relevance issue with a dependency on ARCH_RENESAS,
while for CMM and LVDS the dependency is on DRM_RCAR_DU.

> > > > > wrap all the entries for the subdrivers in a 'if DRM_RCAR_DU'.
> > > >
> > > > That might work.  It can be tricky with bool/tristate, as sometimes m
> > > > is not properly propagated.
> > >
> > > Would you give it a try for a v2 ?
> >
> > Another option is to introduce DRM_RCAR_USE_HDMI and DRM_RCAR_USE_DSI.
> > I'd like to keep Kconfig consistent, with the same method to handle all
> > subdrivers if no specific reason requires doing otherwise.
> 
> The HDMI and DSI drivers are separate drivers that can be (test)compiled,
> regardless of DRM_RCAR_DU is enabled or not.
> 
> The DRM_RCAR_USE_LVDS symbol is different: enabling it does not
> have any impact on the kernel build when DRM_RCAR_DU=y.

That's only caused by how Kconfig is structured, the LVDS encoder is
also a separate kernel module, like the HDMI and DSI encoders. The
difference is caused by the fact that the DU driver needs to call
functions exported by the LVDS driver, which caused requires preventing
a configuration where DRM_RCAR_DU would be built-in and DRM_RCAR_LVDS
would be built as a module.

Patches 1/3 and 3/3 in this series address the fact that the user
shouldn't be asked about the DSI and HDMI encoders if ARCH_RENESAS isn't
set, as those options are meaningless in that case (except when
compile-testing, which is enabled through COMPILE_TEST). The same
happens with this patch due to the dependency on DRM_RCAR_DU, which
itself depends on ARCH_RENESAS. I don't like how we end up doing similar
things in different ways, that makes Kconfig harder to understand and
maintain. I'd like to see all this fixed in a cleaner way, and I think a
'if DRM_RCAR_DU' would address the config "polution" issue in one go for
all subdrivers.

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux