Re: [PATCH v11 3/8] dt-bindings: display: Add ingenic, jz4780-dw-hdmi DT Schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Nikolaus,

Le ven., déc. 10 2021 at 10:53:18 -0600, Rob Herring <robh@xxxxxxxxxx> a écrit :
On Thu, Dec 02, 2021 at 07:39:48PM +0100, H. Nikolaus Schaller wrote:
 From: Sam Ravnborg <sam@xxxxxxxxxxxx>

 Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC.
 Based on .txt binding from Zubair Lutfullah Kakakhel

 We also add generic ddc-i2c-bus to synopsys,dw-hdmi.yaml

 Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
 Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
 Cc: Rob Herring <robh@xxxxxxxxxx>
 Cc: devicetree@xxxxxxxxxxxxxxx
 ---
.../display/bridge/ingenic,jz4780-hdmi.yaml | 78 +++++++++++++++++++
  .../display/bridge/synopsys,dw-hdmi.yaml      |  3 +
  2 files changed, 81 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
 new file mode 100644
 index 0000000000000..49ae1130efded
 --- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml
 @@ -0,0 +1,78 @@
 +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 +%YAML 1.2
 +---
+$id: http://devicetree.org/schemas/display/bridge/ingenic,jz4780-hdmi.yaml#
 +$schema: http://devicetree.org/meta-schemas/core.yaml#
 +
 +title: Bindings for Ingenic JZ4780 HDMI Transmitter
 +
 +maintainers:
 +  - H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
 +
 +description: |
+ The HDMI Transmitter in the Ingenic JZ4780 is a Synopsys DesignWare HDMI 1.4
 +  TX controller IP with accompanying PHY IP.
 +
 +allOf:
 +  - $ref: synopsys,dw-hdmi.yaml#
 +
 +properties:
 +  compatible:
 +    const: ingenic,jz4780-dw-hdmi
 +
 +  reg-io-width:
 +    const: 4
 +
 +  clocks:
 +    maxItems: 2
 +
 +  hdmi-5v-supply:
 +    description: regulator to provide +5V at the connector

Being part of the connector, that belongs in a connector node.

I believe that means adding .atomic_{enable,disable} callbacks to the display-connector bridge (drivers/gpu/drm/bridge/display-connector.c) which would enable/disable the regulator.

Unless it messes up with e.g. cable detection (which I believe requires the regulator to be enabled), in that case unconditionally enable it in the connector's probe function.

 +
 +  ports:
 +    $ref: /schemas/graph.yaml#/properties/ports

You need to define what each 'port' node is.

Have a look at Documentation/devicetree/bindings/display/ingenic,lcd.yaml for an example on how to do this.

 +
 +required:
 +  - compatible
 +  - clocks
 +  - clock-names
 +  - hdmi-5v-supply
 +  - ports
 +  - reg-io-width
 +
 +unevaluatedProperties: false
 +
 +examples:
 +  - |
 +    #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
 +
 +    hdmi: hdmi@10180000 {
 +        compatible = "ingenic,jz4780-dw-hdmi";
 +        reg = <0x10180000 0x8000>;
 +        reg-io-width = <4>;
 +        ddc-i2c-bus = <&i2c4>;
 +        interrupt-parent = <&intc>;
 +        interrupts = <3>;
 +        clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
 +        clock-names = "iahb", "isfr";
 +        hdmi-5v-supply = <&hdmi_power>;
 +
 +        ports {
 +            #address-cells = <1>;
 +            #size-cells = <0>;
 +            hdmi_in: port@0 {
 +                reg = <0>;
 +                dw_hdmi_in: endpoint {
 +                    remote-endpoint = <&jz4780_lcd_out>;
 +                };
 +            };
 +            hdmi_out: port@1 {
 +                reg = <1>;
 +                dw_hdmi_out: endpoint {
 +                    remote-endpoint = <&hdmi_con>;
 +                };
 +            };
 +        };
 +    };
 +
 +...
diff --git a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
 index 9be44a682e67a..9cbeabaee0968 100644
--- a/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
 @@ -50,6 +50,9 @@ properties:
    interrupts:
      maxItems: 1

 +  ddc-i2c-bus:
+ description: An I2C interface if the internal DDC I2C driver is not to be used

That too is already defined to be part of the connector node.

Just remove the property then, since you don't use it in the ci20 bindings.

Cheers,
-Paul

 +
  additionalProperties: true

  ...
 --
 2.33.0








[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux