Re: [PATCH v2] drm: fsl-dcu: enable PIXCLK on LS1021A

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2021-11-08 at 10:11 +0100, Matthias Schiffer wrote:
> On Tue, 2021-10-05 at 16:10 +0200, Matthias Schiffer wrote:
> > The PIXCLK needs to be enabled in SCFG before accessing the DCU on
> > LS1021A,
> > or the access will hang.
> > 
> > Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx
> > >
> 
> Hi,
> what is the status of this patch? I found it "archived" in the dri-
> devel patchwork, should I be looking somewhere else?

ping


> 
> 
> 
> 
> > ---
> > 
> > v2:
> > - rebase
> > - remove unnecessary argument of fsl_dcu_scfg_config_ls1021a()
> > 
> > 
> >  drivers/gpu/drm/fsl-dcu/Kconfig           |  1 +
> >  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 25
> > +++++++++++++++++++++++
> >  drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h |  3 +++
> >  3 files changed, 29 insertions(+)
> > 
> > diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl-
> > dcu/Kconfig
> > index d7dd8ba90e3a..9e5a35e7c00c 100644
> > --- a/drivers/gpu/drm/fsl-dcu/Kconfig
> > +++ b/drivers/gpu/drm/fsl-dcu/Kconfig
> > @@ -8,6 +8,7 @@ config DRM_FSL_DCU
> >  	select DRM_PANEL
> >  	select REGMAP_MMIO
> >  	select VIDEOMODE_HELPERS
> > +	select MFD_SYSCON if SOC_LS1021A
> >  	help
> >  	  Choose this option if you have an Freescale DCU chipset.
> >  	  If M is selected the module will be called fsl-dcu-drm.
> > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> > index 660fe573db96..b6b1cb75fc41 100644
> > --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c
> > @@ -50,6 +50,23 @@ static const struct regmap_config
> > fsl_dcu_regmap_config = {
> >  	.volatile_reg = fsl_dcu_drm_is_volatile_reg,
> >  };
> >  
> > +static int fsl_dcu_scfg_config_ls1021a(void)
> > +{
> > +	struct regmap *scfg;
> > +
> > +	scfg = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
> > +	if (IS_ERR(scfg))
> > +		return PTR_ERR(scfg);
> > +
> > +	/*
> > +	 * For simplicity, enable the PIXCLK unconditionally. It might
> > +	 * be possible to disable the clock in PM or on unload as a
> > future
> > +	 * improvement.
> > +	 */
> > +	return regmap_update_bits(scfg, SCFG_PIXCLKCR,
> > SCFG_PIXCLKCR_PXCEN,
> > +				  SCFG_PIXCLKCR_PXCEN);
> > +}
> > +
> >  static void fsl_dcu_irq_reset(struct drm_device *dev)
> >  {
> >  	struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
> > @@ -108,6 +125,14 @@ static int fsl_dcu_load(struct drm_device
> > *dev, unsigned long flags)
> >  		return ret;
> >  	}
> >  
> > +	if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) {
> > +		ret = fsl_dcu_scfg_config_ls1021a();
> > +		if (ret < 0) {
> > +			dev_err(dev->dev, "failed to enable pixclk\n");
> > +			goto done_vblank;
> > +		}
> > +	}
> > +
> >  	ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
> >  	if (ret < 0) {
> >  		dev_err(dev->dev, "failed to initialize vblank\n");
> > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> > index e2049a0e8a92..566396013c04 100644
> > --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h
> > @@ -160,6 +160,9 @@
> >  #define FSL_DCU_ARGB4444		12
> >  #define FSL_DCU_YUV422			14
> >  
> > +#define SCFG_PIXCLKCR			0x28
> > +#define SCFG_PIXCLKCR_PXCEN		BIT(31)
> > +
> >  #define VF610_LAYER_REG_NUM		9
> >  #define LS1021A_LAYER_REG_NUM		10
> >  




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux