On 11/30/21 19:12, Thomas Hellström wrote:
On Tue, 2021-11-30 at 16:02 +0100, Christian König wrote:
Am 30.11.21 um 15:35 schrieb Thomas Hellström:
On Tue, 2021-11-30 at 14:26 +0100, Christian König wrote:
Am 30.11.21 um 13:56 schrieb Thomas Hellström:
On 11/30/21 13:42, Christian König wrote:
Am 30.11.21 um 13:31 schrieb Thomas Hellström:
[SNIP]
Other than that, I didn't investigate the nesting fails
enough to
say I can accurately review this. :)
Basically the problem is that within enable_signaling()
which
is
called with the dma_fence lock held, we take the dma_fence
lock
of
another fence. If that other fence is a dma_fence_array, or
a
dma_fence_chain which in turn tries to lock a
dma_fence_array
we hit
a splat.
Yeah, I already thought that you constructed something like
that.
You get the splat because what you do here is illegal, you
can't
mix
dma_fence_array and dma_fence_chain like this or you can end
up
in a
stack corruption.
Hmm. Ok, so what is the stack corruption, is it that the
enable_signaling() will end up with endless recursion? If so,
wouldn't
it be more usable we break that recursion chain and allow a
more
general use?
The problem is that this is not easily possible for
dma_fence_array
containers. Just imagine that you drop the last reference to the
containing fences during dma_fence_array destruction if any of
the
contained fences is another container you can easily run into
recursion
and with that stack corruption.
Indeed, that would require some deeper surgery.
That's one of the major reasons I came up with the
dma_fence_chain
container. This one you can chain any number of elements together
without running into any recursion.
Also what are the mixing rules between these? Never use a
dma-fence-chain as one of the array fences and never use a
dma-fence-array as a dma-fence-chain fence?
You can't add any other container to a dma_fence_array, neither
other
dma_fence_array instances nor dma_fence_chain instances.
IIRC at least technically a dma_fence_chain can contain a
dma_fence_array if you absolutely need that, but Daniel, Jason
and I
already had the same discussion a while back and came to the
conclusion
to avoid that as well if possible.
Yes, this is actually the use-case. But what I can't easily
guarantee
is that that dma_fence_chain isn't fed into a dma_fence_array
somewhere
else. How do you typically avoid that?
Meanwhile I guess I need to take a different approach in the driver
to
avoid this altogether.
Jason and I came up with a deep dive iterator for his use case, but I
think we don't want to use that any more after my dma_resv rework.
In other words when you need to create a new dma_fence_array you
flatten
out the existing construct which is at worst case
dma_fence_chain->dma_fence_array->dma_fence.
Ok, Are there any cross-driver contract here, Like every driver using a
dma_fence_array need to check for dma_fence_chain and flatten like
above?
/Thomas
Oh, and a follow up question:
If there was a way to break the recursion on final put() (using the same
basic approach as patch 2 in this series uses to break recursion in
enable_signaling()), so that none of these containers did require any
special treatment, would it be worth pursuing? I guess it might be
possible by having the callbacks drop the references rather than the
loop in the final put. + a couple of changes in code iterating over the
fence pointers.
/Thomas
Regards,
Christian.
/Thomas
Regards,
Christian.
/Thomas
Regards,
Christian.
But I'll update the commit message with a typical splat.
/Thomas
