Re: [PATCH v3 05/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d

[Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>]

On 16/11/2021 09:22, Vinod Koul wrote:
> We cannot enable mode_3d when we are using the DSC. So pass
> configuration to detect DSC is enabled and not enable mode_3d
> when we are using DSC
>
> We add a helper dpu_encoder_helper_get_dsc() to detect dsc
> enabled and pass this to .setup_intf_cfg()
>
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> ---
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h     | 11 +++++++++++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c |  2 ++
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c           |  3 ++-
>   drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h           |  2 ++
>   4 files changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> index e7270eb6b84b..efb85d595598 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> @@ -332,6 +332,17 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
>   	return BLEND_3D_NONE;
>   }
>   
> +static inline bool dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc)
> +{
> +	struct drm_encoder *drm_enc = phys_enc->parent;
> +	struct msm_drm_private *priv = drm_enc->dev->dev_private;
> +
> +	if (priv->dsc)
> +		return priv->dsc->dsc_mask;
> +
> +	return 0;
> +}
> +
>   /**
>    * dpu_encoder_helper_split_config - split display configuration helper function
>    *	This helper function may be used by physical encoders to configure
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> index 34a6940d12c5..f3f00f4d0193 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
> @@ -70,6 +70,8 @@ static void _dpu_encoder_phys_cmd_update_intf_cfg(
>   	intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_CMD;
>   	intf_cfg.stream_sel = cmd_enc->stream_sel;
>   	intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
> +	intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
> +

I'd prefer if we disable mode_3d here, rather than ignoring it in the 
dpu_hw_ctl_intf_cfg()

>   	ctl->ops.setup_intf_cfg(ctl, &intf_cfg);
>   }
>   
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> index 64740ddb983e..36831457a91b 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
> @@ -519,7 +519,8 @@ static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
>   
>   	intf_cfg |= (cfg->intf & 0xF) << 4;
>   
> -	if (cfg->mode_3d) {
> +	/* In DSC we can't set merge, so check for dsc too */
> +	if (cfg->mode_3d && !cfg->dsc) {

I think here'd better have WARN_ON(cfg->mode_3d && cfg->dsc) or similar 
dev_warn().

>   		intf_cfg |= BIT(19);
>   		intf_cfg |= (cfg->mode_3d - 0x1) << 20;
>   	}
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> index 806c171e5df2..9847c9c46d6f 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
> @@ -40,6 +40,7 @@ struct dpu_hw_stage_cfg {
>    * @merge_3d:              3d merge block used
>    * @intf_mode_sel:         Interface mode, cmd / vid
>    * @stream_sel:            Stream selection for multi-stream interfaces
> + * @dsc:                   DSC BIT masks
>    */
>   struct dpu_hw_intf_cfg {
>   	enum dpu_intf intf;
> @@ -47,6 +48,7 @@ struct dpu_hw_intf_cfg {
>   	enum dpu_merge_3d merge_3d;
>   	enum dpu_ctl_mode_sel intf_mode_sel;
>   	int stream_sel;
> +	unsigned int dsc;
>   };
>   
>   /**


--
With best wishes
Dmitry