Re: [PATCH v7 2/8] drm/ingenic: Add support for JZ4780 and HDMI output

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> Am 23.11.2021 um 19:06 schrieb Paul Cercueil <paul@xxxxxxxxxxxxxxx>:
> 
> Hi Nikolaus,
> 
> Le mar., nov. 23 2021 at 18:46:17 +0100, H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> a écrit :
>> From: Paul Boddie <paul@xxxxxxxxxxxxx>
>> Add support for the LCD controller present on JZ4780 SoCs.
>> This SoC uses 8-byte descriptors which extend the current
>> 4-byte descriptors used for other Ingenic SoCs.
>> Tested on MIPS Creator CI20 board.
>> Signed-off-by: Paul Boddie <paul@xxxxxxxxxxxxx>
>> Signed-off-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
>> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
>> ---
>> drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 55 ++++++++++++++++++++++-
>> drivers/gpu/drm/ingenic/ingenic-drm.h     | 38 ++++++++++++++++
>> 2 files changed, 92 insertions(+), 1 deletion(-)
>> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> index 0bb590c3910d9..5ff97a4bbcfe5 100644
>> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>> @@ -6,6 +6,7 @@
>> #include "ingenic-drm.h"
>> +#include <linux/bitfield.h>
>> #include <linux/component.h>
>> #include <linux/clk.h>
>> #include <linux/dma-mapping.h>
>> @@ -49,6 +50,11 @@ struct ingenic_dma_hwdesc {
>> 	u32 addr;
>> 	u32 id;
>> 	u32 cmd;
>> +	/* extended hw descriptor for jz4780 */
>> +	u32 offsize;
>> +	u32 pagewidth;
>> +	u32 cpos;
>> +	u32 dessize;
>> } __aligned(16);
>> struct ingenic_dma_hwdescs {
>> @@ -60,6 +66,7 @@ struct jz_soc_info {
>> 	bool needs_dev_clk;
>> 	bool has_osd;
>> 	bool map_noncoherent;
>> +	bool use_extended_hwdesc;
>> 	unsigned int max_width, max_height;
>> 	const u32 *formats_f0, *formats_f1;
>> 	unsigned int num_formats_f0, num_formats_f1;
>> @@ -446,6 +453,9 @@ static int ingenic_drm_plane_atomic_check(struct drm_plane *plane,
>> 	if (!crtc)
>> 		return 0;
>> +	if (plane == &priv->f0)
>> +		return -EINVAL;
>> +
>> 	crtc_state = drm_atomic_get_existing_crtc_state(state,
>> 							crtc);
>> 	if (WARN_ON(!crtc_state))
>> @@ -662,6 +672,33 @@ static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
>> 		hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
>> 		hwdesc->next = dma_hwdesc_addr(priv, next_id);
>> +		if (priv->soc_info->use_extended_hwdesc) {
>> +			hwdesc->cmd |= JZ_LCD_CMD_FRM_ENABLE;
>> +
>> +			/* Extended 8-byte descriptor */
>> +			hwdesc->cpos = 0;
>> +			hwdesc->offsize = 0;
>> +			hwdesc->pagewidth = 0;
>> +
>> +			switch (newstate->fb->format->format) {
>> +			case DRM_FORMAT_XRGB1555:
>> +				hwdesc->cpos |= JZ_LCD_CPOS_RGB555;
>> +				fallthrough;
>> +			case DRM_FORMAT_RGB565:
>> +				hwdesc->cpos |= JZ_LCD_CPOS_BPP_15_16;
>> +				break;
>> +			case DRM_FORMAT_XRGB8888:
>> +				hwdesc->cpos |= JZ_LCD_CPOS_BPP_18_24;
>> +				break;
>> +			}
>> +			hwdesc->cpos |= (JZ_LCD_CPOS_COEFFICIENT_1 <<
>> +					 JZ_LCD_CPOS_COEFFICIENT_OFFSET);
>> +			hwdesc->dessize =
>> +				(0xff << JZ_LCD_DESSIZE_ALPHA_OFFSET) |
>> +				FIELD_PREP(JZ_LCD_DESSIZE_HEIGHT_MASK, height - 1) |
>> +				FIELD_PREP(JZ_LCD_DESSIZE_WIDTH_MASK, width - 1);
>> +		}
>> +
>> 		if (drm_atomic_crtc_needs_modeset(crtc_state)) {
>> 			fourcc = newstate->fb->format->format;
>> @@ -693,6 +730,9 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
>> 		    | JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
>> 	}
>> +	if (priv->soc_info->use_extended_hwdesc)
>> +		cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
>> +
>> 	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
>> 		cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
>> 	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
>> @@ -1064,7 +1104,7 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
>> 	}
>> 	regmap_config = ingenic_drm_regmap_config;
>> -	regmap_config.max_register = res->end - res->start;
>> +	regmap_config.max_register = res->end - res->start - 4;
> 
> I think this is wrong :)

Oops, that is a side-effect of my patch series editing tool.
It sometimes reverts changes of a previous commit if both
affect the same file. Sorry for that and I should fix it...

I'll send v8. 

BR and thanks,
Nikolaus


> 
> Cheers,
> -Paul
> 
>> 	priv->map = devm_regmap_init_mmio(dev, base,
>> 					  &regmap_config);
>> 	if (IS_ERR(priv->map)) {
>> @@ -1468,10 +1508,23 @@ static const struct jz_soc_info jz4770_soc_info = {
>> 	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
>> };
>> +static const struct jz_soc_info jz4780_soc_info = {
>> +	.needs_dev_clk = true,
>> +	.has_osd = true,
>> +	.use_extended_hwdesc = true,
>> +	.max_width = 4096,
>> +	.max_height = 2048,
>> +	.formats_f1 = jz4770_formats_f1,
>> +	.num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
>> +	.formats_f0 = jz4770_formats_f0,
>> +	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
>> +};
>> +
>> static const struct of_device_id ingenic_drm_of_match[] = {
>> 	{ .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info },
>> 	{ .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info },
>> 	{ .compatible = "ingenic,jz4770-lcd", .data = &jz4770_soc_info },
>> +	{ .compatible = "ingenic,jz4780-lcd", .data = &jz4780_soc_info },
>> 	{ /* sentinel */ },
>> };
>> MODULE_DEVICE_TABLE(of, ingenic_drm_of_match);
>> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h b/drivers/gpu/drm/ingenic/ingenic-drm.h
>> index 22654ac1dde1c..cb1d09b625881 100644
>> --- a/drivers/gpu/drm/ingenic/ingenic-drm.h
>> +++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
>> @@ -44,8 +44,11 @@
>> #define JZ_REG_LCD_XYP1				0x124
>> #define JZ_REG_LCD_SIZE0			0x128
>> #define JZ_REG_LCD_SIZE1			0x12c
>> +#define JZ_REG_LCD_PCFG				0x2c0
>> #define JZ_LCD_CFG_SLCD				BIT(31)
>> +#define JZ_LCD_CFG_DESCRIPTOR_8			BIT(28)
>> +#define JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN	BIT(25)
>> #define JZ_LCD_CFG_PS_DISABLE			BIT(23)
>> #define JZ_LCD_CFG_CLS_DISABLE			BIT(22)
>> #define JZ_LCD_CFG_SPL_DISABLE			BIT(21)
>> @@ -63,6 +66,7 @@
>> #define JZ_LCD_CFG_DE_ACTIVE_LOW		BIT(9)
>> #define JZ_LCD_CFG_VSYNC_ACTIVE_LOW		BIT(8)
>> #define JZ_LCD_CFG_18_BIT			BIT(7)
>> +#define JZ_LCD_CFG_24_BIT			BIT(6)
>> #define JZ_LCD_CFG_PDW				(BIT(5) | BIT(4))
>> #define JZ_LCD_CFG_MODE_GENERIC_16BIT		0
>> @@ -132,6 +136,7 @@
>> #define JZ_LCD_CMD_SOF_IRQ			BIT(31)
>> #define JZ_LCD_CMD_EOF_IRQ			BIT(30)
>> #define JZ_LCD_CMD_ENABLE_PAL			BIT(28)
>> +#define JZ_LCD_CMD_FRM_ENABLE			BIT(26)
>> #define JZ_LCD_SYNC_MASK			0x3ff
>> @@ -153,6 +158,7 @@
>> #define JZ_LCD_RGBC_EVEN_BGR			(0x5 << 0)
>> #define JZ_LCD_OSDC_OSDEN			BIT(0)
>> +#define JZ_LCD_OSDC_ALPHAEN			BIT(2)
>> #define JZ_LCD_OSDC_F0EN			BIT(3)
>> #define JZ_LCD_OSDC_F1EN			BIT(4)
>> @@ -176,6 +182,38 @@
>> #define JZ_LCD_SIZE01_WIDTH_LSB			0
>> #define JZ_LCD_SIZE01_HEIGHT_LSB		16
>> +#define JZ_LCD_DESSIZE_ALPHA_OFFSET		24
>> +#define JZ_LCD_DESSIZE_HEIGHT_MASK		GENMASK(23, 12)
>> +#define JZ_LCD_DESSIZE_WIDTH_MASK		GENMASK(11, 0)
>> +
>> +#define JZ_LCD_CPOS_BPP_15_16			(4 << 27)
>> +#define JZ_LCD_CPOS_BPP_18_24			(5 << 27)
>> +#define JZ_LCD_CPOS_BPP_30			(7 << 27)
>> +#define JZ_LCD_CPOS_RGB555			BIT(30)
>> +#define JZ_LCD_CPOS_PREMULTIPLY_LCD		BIT(26)
>> +#define JZ_LCD_CPOS_COEFFICIENT_OFFSET		24
>> +#define JZ_LCD_CPOS_COEFFICIENT_0		0
>> +#define JZ_LCD_CPOS_COEFFICIENT_1		1
>> +#define JZ_LCD_CPOS_COEFFICIENT_ALPHA1		2
>> +#define JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1	3
>> +
>> +#define JZ_LCD_RGBC_RGB_PADDING			BIT(15)
>> +#define JZ_LCD_RGBC_RGB_PADDING_FIRST		BIT(14)
>> +#define JZ_LCD_RGBC_422				BIT(8)
>> +#define JZ_LCD_RGBC_RGB_FORMAT_ENABLE		BIT(7)
>> +
>> +#define JZ_LCD_PCFG_PRI_MODE			BIT(31)
>> +#define JZ_LCD_PCFG_HP_BST_4			(0 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_8			(1 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_16			(2 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_32			(3 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_64			(4 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_16_CONT		(5 << 28)
>> +#define JZ_LCD_PCFG_HP_BST_DISABLE		(7 << 28)
>> +#define JZ_LCD_PCFG_THRESHOLD2_OFFSET		18
>> +#define JZ_LCD_PCFG_THRESHOLD1_OFFSET		9
>> +#define JZ_LCD_PCFG_THRESHOLD0_OFFSET		0
>> +
>> struct device;
>> struct drm_plane;
>> struct drm_plane_state;
>> --
>> 2.33.0





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux