Hi Kever, On Thu, 18 Nov 2021 at 10:50, Kever Yang <kever.yang@xxxxxxxxxxxxxx> wrote: > On 2021/11/18 下午5:53, Daniel Stone wrote: > > Exactly what Heiko said. If you would like to upstream the driver then > > that would be fantastic to see, but I'm afraid you do not get to > > prevent someone else from doing the work themselves. > > First of all, we never stop any one to doing there work on upstream if > the source code is write totally by themselves. > > Second, there are also many modules are upstream by developers based on > Rockchip source code, please note that > all of them have basic respect to our work, they do communicate with us > first. > > But this committer do not take any respect to our engineers and their > hard working: > - He didn't contact with us; > - There isn't any information about original author in the commit message; > As I have known, if I use source code from another developer, I > need to at least add a "Signed-off-by" with original author; > - This commit and mail does not even have a 'CC' to original author. > > I NAK because I think this is not part of the open source spirit, and > this kind of behavior should not be encouraged. OK, I see where you're coming from, and I agree that the attribution should have been handled more carefully. On the other hand, please consider this from the other perspective. Sascha has been free to take the downstream Rockchip BSP code and attempt to upstream it to the Linux kernel, which you are unhappy about. But then the Rockchip driver was developed totally downstream, with no attempt to ever communicate with the upstream Linux or DRM/KMS developers. Rockchip advertises that it is shipped as a Linux kernel with a KMS driver. But we were never informed, or CCed, or anything. If you would like the community to more actively work with you - then please yourself work more actively with the community. The first commit of the VOP2 driver was in July 2020, and that was of the full driver so presumably it started quite some time before then. So that is a minimum of 17 months that you have had to engage with upstream ... Technically, the driver cannot be upstreamed as-is. It looks as if it were a pre-atomic driver, that was half-converted to atomic, and then has been half-converted to atomic helpers as well. Things like reference counting and global state are not handled correctly at all. You can see this if you try to run Weston on top of the VOP2 driver: the framerate is decimated because the event handling massively over-synchronises, and the event timestamps which arrive are incorrect. This would be fixed by correctly using the event helpers that we have had in the tree for years (which would also eliminate the unnecessary framebuffer reference handling). It also does not work with the GPU drivers in the tree because it lacks the one-liner to correctly handle dma_resv synchronisation, which makes it both too fast as it displays content which is not ready, and too slow because it can't do it at full frame rate. Similarly, on the RK3566 EVB, the DSI does not work unless HDMI is also active, but when HDMI is active at the same time as DSI, it just shows a blank screen. I believe the root cause of this is that the VOP2 driver does not use any of the atomic state correctly, and instead stores its own state in driver-global structures, using a lot of unnecessary mutexes to try to synchronise this state. Not only does this synchronisation not actually work, but it causes a severe performance degradation due to mutex contention. I believe the best path forward to an upstream VOP2 driver is a patch series consisting of: - start from a blank slate, using the atomic framework and helpers as they were intended to be, with basic support for the VOP2 and one or two connector types, doing linear XRGB only - any cleanups which would enable this to share more code with - add YUV support, including planar buffers - add AFBC support, with the AFBC enable/disable correctly synchronised through atomic state (this is necessary since the AFBC decoder is not directly on the planes per se but shared) - add more connector types - add writeback support - add other Rockchip-specific codepaths such as HDR10 Cheers, Daniel
