Hi Joel, Got it. I will change user name for next patch send. The ast2600 is tested on my platform. And I will try this on the ast2500. Below is testing steps: 1. Apply the patch into project. 2. Add below config for VT and LOGO on. CONFIG_TTY=y CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_VT_CONSOLE_SLEEP=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y CONFIG_LDISC_AUTOLOAD=y CONFIG_DEVMEM=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_CLUT224=y 3. The Linux logo will be shown on the screen, when the BMC boot in Linux. Thanks, By Tommy > -----Original Message----- > From: Joel Stanley <joel@xxxxxxxxx> > Sent: Wednesday, November 17, 2021 2:06 PM > To: Tommy Huang <tommy_huang@xxxxxxxxxxxxxx> > Cc: David Airlie <airlied@xxxxxxxx>; Daniel Vetter <daniel@xxxxxxxx>; Rob > Herring <robh+dt@xxxxxxxxxx>; Andrew Jeffery <andrew@xxxxxxxx>; > linux-aspeed <linux-aspeed@xxxxxxxxxxxxxxxx>; open list:DRM DRIVERS > <dri-devel@xxxxxxxxxxxxxxxxxxxxx>; devicetree <devicetree@xxxxxxxxxxxxxxx>; > Linux ARM <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx>; Linux Kernel Mailing List > <linux-kernel@xxxxxxxxxxxxxxx>; BMC-SW <BMC-SW@xxxxxxxxxxxxxx> > Subject: Re: [PATCH v3 0/4] Add Aspeed AST2600 soc display support > > On Wed, 17 Nov 2021 at 05:45, tommy-huang > <tommy_huang@xxxxxxxxxxxxxx> wrote: > > > > v3: > > Refine the patch for clear separate purpose. > > Skip to send devicetree patch > > Thanks Tommy. A few things: > > - Set up your authorship in git: > > git config --global user.name "Tommy Haung" > > - The "Add AST2600 chip support" patch is the same as the one I sent, you can > put mine back in your series now > > - We should add a device tree bindings document > > Can you confirm you tested these changes on both the ast2500 and the > ast2600? How did you test? > > Cheers, > > Joel > > > > > > v2: > > Remove some unnecessary patch. > > Refine for reviwer request. > > > > v1: > > First add patch. > > > > Joel Stanley (2): > > ARM: dts: aspeed: Add GFX node to AST2600 > > ARM: dts: aspeed: ast2600-evb: Enable GFX device > > > > tommy-huang (2): > > drm/aspeed: Update INTR_STS handling > > drm/aspeed: Add AST2600 chip support > > > > arch/arm/boot/dts/aspeed-ast2600-evb.dts | 18 ++++++++++++++++++ > > arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++ > > drivers/gpu/drm/aspeed/aspeed_gfx.h | 1 + > > drivers/gpu/drm/aspeed/aspeed_gfx_drv.c | 15 ++++++++++++++- > > 4 files changed, 44 insertions(+), 1 deletion(-) > > > > -- > > 2.17.1 > >
