Re: [PATCH v10, 06/19] media: mtk-vcodec: Manage multi hardware information

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 11, 2021 at 12:14:47PM +0800, Yunfei Dong wrote:
> Register each hardware(subdev) as platform device used to manage each
> hardware information which includes irq/power/clk. The hardware includes
> LAT0, LAT1 and CORE. And call of_platform_populate in main device.
> 
> Using subdev_bitmap to record whether each device is register done. Then check
> whether all subdev are register done before open main device.

I can somehow understand what the patch is trying to do but the commit message needs to be rephrased for people to understand the patch.

> --- a/drivers/media/platform/mtk-vcodec/Makefile
> +++ b/drivers/media/platform/mtk-vcodec/Makefile
> @@ -2,7 +2,8 @@
>  
>  obj-$(CONFIG_VIDEO_MEDIATEK_VCODEC) += mtk-vcodec-dec.o \
>  				       mtk-vcodec-enc.o \
> -				       mtk-vcodec-common.o
> +				       mtk-vcodec-common.o \
> +					   mtk-vcodec-dec-hw.o

Looks better to align to previous lines.

> +static int mtk_vcodec_subdev_device_check(struct mtk_vcodec_ctx *ctx)
> +{
> +	struct mtk_vcodec_dev *vdec_dev = ctx->dev;

ctx isn't used in other places.  Looks like the function can accept "struct mtk_vcodec_dev *vdec_dev" as the only argument.

> +	for (i = 0; i < ARRAY_SIZE(mtk_vdec_hw_match); i++) {
> +		of_id = &mtk_vdec_hw_match[i];
> +		subdev_node = of_find_compatible_node(NULL, NULL,
> +			of_id->compatible);
> +		if (!subdev_node)
> +			continue;

Does it really need to continue if one of the sub-devices is not ready?

It depends on whether mtk_vdec_hw_match is a must list or not.  For example, if mtk_vdec_hw_match has 4 entries but the DT only has 2 entries, shall it return an error about the entry count mismatch?

> +		if (!of_device_is_available(subdev_node)) {
> +			of_node_put(subdev_node);
> +			dev_err(&pdev->dev, "Fail to get subdev node\n");
> +			continue;

The error message shouldn't be "Fail to get ...".  Also the same question: does it really need to continue?

> +		hw_idx = (enum mtk_vdec_hw_id)(uintptr_t)of_id->data;
> +		vdec_dev->subdev_node[hw_idx] = subdev_node;

I am wondering if it wouldn't need subdev_node.  Isn't vdec_dev->subdev_dev sufficient to clue all the things?

> +		if (!test_bit(hw_idx, vdec_dev->subdev_bitmap)) {
> +			of_node_put(subdev_node);
> +			dev_err(&pdev->dev, "Vdec %d is not ready", hw_idx);
> +			return -EAGAIN;
> +		}
> +		of_node_put(subdev_node);
> +	}
> +
> +	return 0;
> +}

In addition to the question for subdev_node.  The function calls of_node_put() for every paths.  I am not sure if the function should call of_node_put() in non-error-handling paths (i.e. I thought it needs someone to hold the reference count).

By reading [v10,11/19] media: mtk-vcodec: Generalize power and clock on/off interfaces[1], the mtk_vcodec_get_hw_dev() calls of_node_put() after it gets the hw_pdev.  Looks like the code is meant to borrow the reference count to mtk_vcodec_get_hw_dev().

In short, if the subdev_node is designed to borrow reference count to others, mtk_vcodec_subdev_device_check() shouldn't call of_node_put() in non-error-handling paths.

[1]: https://patchwork.linuxtv.org/project/linux-media/patch/20211111041500.17363-12-yunfei.dong@xxxxxxxxxxxx/

> @@ -249,32 +322,10 @@ static int mtk_vcodec_probe(struct platform_device *pdev)
[...]
> +	ret = mtk_vcodec_init_dec_resources(dev);
>  	if (ret) {
> -		dev_err(&pdev->dev, "Failed to install dev->dec_irq %d (%d)",
> -			dev->dec_irq,
> -			ret);
> -		goto err_res;
> +		dev_err(&pdev->dev, "Failed to init pm and registers");

The error message makes less sense about mentioning pm and registers.

> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_hw.c
[...]
> +static int mtk_vdec_hw_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct mtk_vdec_hw_dev *subdev_dev;
> +	struct mtk_vcodec_dev *main_dev;
> +	const struct of_device_id *of_id;
> +	int hw_idx;
> +	int ret;
> +
> +	if (!dev->parent)
> +		return -EPROBE_DEFER;

IIUC, it shouldn't happen because the deivce is populated from main device.  Moreover, would it help to defer the probe if dev->parent is NULL?

> +	main_dev = dev_get_drvdata(dev->parent);
> +	if (!main_dev)
> +		return -EPROBE_DEFER;

Share the same concern with comment above.

> +static struct platform_driver mtk_vdec_driver = {
> +	.probe	= mtk_vdec_hw_probe,
> +	.driver	= {
> +		.name	= "mtk-vdec-comp",
> +		.of_match_table = mtk_vdec_hw_match,
> +	},
> +};
> +
> +module_platform_driver(mtk_vdec_driver);

I prefer to remove the blank line in between mtk_vdec_driver and module_platform_driver.

> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mtk-vcodec/mtk_vcodec_drv.h
[...]
> @@ -423,6 +436,11 @@ struct mtk_vcodec_enc_pdata {
>   * @pm: power management control
>   * @dec_capability: used to identify decode capability, ex: 4k
>   * @enc_capability: used to identify encode capability
> + *
> + * @subdev_dev: subdev hardware device
> + * @subdev_node: subdev node
> + *
> + * @subdev_bitmap: used to record hardware is ready or not
>   */
>  struct mtk_vcodec_dev {
>  	struct v4l2_device v4l2_dev;
> @@ -460,6 +478,11 @@ struct mtk_vcodec_dev {
>  	struct mtk_vcodec_pm pm;
>  	unsigned int dec_capability;
>  	unsigned int enc_capability;
> +
> +	void *subdev_dev[MTK_VDEC_HW_MAX];
> +	struct device_node *subdev_node[MTK_VDEC_HW_MAX];

The same question: if it already has subdev_dev, does it still need subdev_node?



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux