On Wed, 10 Nov 2021 20:43:28 +0100, H. Nikolaus Schaller wrote: > From: Sam Ravnborg <sam@xxxxxxxxxxxx> > > Add DT bindings for the hdmi driver for the Ingenic JZ4780 SoC. > Based on .txt binding from Zubair Lutfullah Kakakhel > > We also add add generic ddc-i2c-bus to synopsys,dw-hdmi.yaml > > Signed-off-by: Sam Ravnborg <sam@xxxxxxxxxxxx> > Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> > Cc: Rob Herring <robh@xxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > --- > .../display/bridge/synopsys,dw-hdmi.yaml | 3 + > .../bindings/display/ingenic-jz4780-hdmi.yaml | 76 +++++++++++++++++++ > 2 files changed, 79 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml:36:5: [warning] wrong indentation: expected 2 but found 4 (indentation) dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.example.dt.yaml: hdmi@10180000: 'clock-names', 'ddc-i2c-bus', 'interrupt-parent', 'interrupts', 'reg' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/ingenic-jz4780-hdmi.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1553577 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
