RE: [PATCH v2] drm/dp: Fix aux->transfer NULL pointer dereference on drm_dp_dpcd_access

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[AMD Official Use Only]

Hi Jani:

> -----Original Message-----
> From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> Sent: Tuesday, November 2, 2021 4:40 PM
> To: Yuan, Perry <Perry.Yuan@xxxxxxx>; Maarten Lankhorst
> <maarten.lankhorst@xxxxxxxxxxxxxxx>; Maxime Ripard <mripard@xxxxxxxxxx>;
> Thomas Zimmermann <tzimmermann@xxxxxxx>; David Airlie <airlied@xxxxxxxx>;
> Daniel Vetter <daniel@xxxxxxxx>
> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Huang,
> Shimmer <Xinmei.Huang@xxxxxxx>; Huang, Ray <Ray.Huang@xxxxxxx>
> Subject: RE: [PATCH v2] drm/dp: Fix aux->transfer NULL pointer dereference on
> drm_dp_dpcd_access
> 
> [CAUTION: External Email]
> 
> On Tue, 02 Nov 2021, "Yuan, Perry" <Perry.Yuan@xxxxxxx> wrote:
> > [AMD Official Use Only]
> >
> > Hi Jani:
> > Thanks for your comments.
> >
> >> -----Original Message-----
> >> From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> >> Sent: Monday, November 1, 2021 9:07 PM
> >> To: Yuan, Perry <Perry.Yuan@xxxxxxx>; Maarten Lankhorst
> >> <maarten.lankhorst@xxxxxxxxxxxxxxx>; Maxime Ripard
> >> <mripard@xxxxxxxxxx>; Thomas Zimmermann <tzimmermann@xxxxxxx>;
> David
> >> Airlie <airlied@xxxxxxxx>; Daniel Vetter <daniel@xxxxxxxx>
> >> Cc: Yuan, Perry <Perry.Yuan@xxxxxxx>;
> >> dri-devel@xxxxxxxxxxxxxxxxxxxxx; linux- kernel@xxxxxxxxxxxxxxx;
> >> Huang, Shimmer <Xinmei.Huang@xxxxxxx>; Huang, Ray
> <Ray.Huang@xxxxxxx>
> >> Subject: Re: [PATCH v2] drm/dp: Fix aux->transfer NULL pointer
> >> dereference on drm_dp_dpcd_access
> >>
> >> [CAUTION: External Email]
> >>
> >> On Mon, 01 Nov 2021, Perry Yuan <Perry.Yuan@xxxxxxx> wrote:
> >> > Fix below crash by adding a check in the drm_dp_dpcd_access which
> >> > ensures that aux->transfer was actually initialized earlier.
> >>
> >> Gut feeling says this is papering over a real usage issue somewhere
> >> else. Why is the aux being used for transfers before ->transfer has
> >> been set? Why should the dp helper be defensive against all kinds of
> misprogramming?
> >>
> >>
> >> BR,
> >> Jani.
> >>
> >
> > The issue was found by Intel IGT test suite, graphic by pass test case.
> > https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitl
> > ab.freedesktop.org%2Fdrm%2Figt-gpu-
> tools&amp;data=04%7C01%7CPerry.Yuan
> > %40amd.com%7C83d011acfe65437c0fa808d99ddc65b0%7C3dd8961fe4884e6
> 08e11a8
> >
> 2d994e183d%7C0%7C0%7C637714392203200313%7CUnknown%7CTWFpbGZsb
> 3d8eyJWIj
> >
> oiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C100
> 0&am
> >
> p;sdata=snPpRYLGeJtTpNGle1YHZAvevcABbgLkgOsffiNzQPw%3D&amp;reserved
> =0
> > normally use case will not see the issue.
> > To avoid this issue happy again when we run the test case , it will be nice to
> add a check before the transfer is called.
> > And we can see that it really needs to have a check here to make ITG &kernel
> happy.
> 
> You're missing my point. What is the root cause? Why do you have the aux
> device or connector registered before ->transfer function is initialized. I don't
> think you should do that.
> 
> BR,
> Jani.
> 

One potential IGT fix patch to resolve the test case failure is:

tests/amdgpu/amd_bypass.c
	data->pipe_crc = igt_pipe_crc_new(data->drm_fd, data->pipe_id,
					 - AMDGPU_PIPE_CRC_SOURCE_DPRX);
					 + INTEL_PIPE_CRC_SOURCE_AUTO);
The kernel panic error gone after change  "dprx" to "auto" in the IGT test.

In my view ,the IGT amdgpu bypass test will do some common setup work including crc piple, source. 
When the IGT sets up a new CRC pipe capture source for amdgpu bypass test,  the SOURCE was set as "dprx" instead of "auto" 
It makes "amdgpu_dm_crtc_set_crc_source()"  failed to set correct  AUX and it's  transfer function invalid .
The system I tested use HDMI port connected to monitor .

amdgpu_dm_crtc_set_crc_source->    (aux = (aconn->port) ? &aconn->port->aux : &aconn->dm_dp_aux.aux;)
	 drm_dp_start_crc ->   
		drm_dp_dpcd_readb->   aux->transfer is NULL, issue here. 
The fix will  use the "auto" keyword, which will let the driver select a default source of frame CRCs for this CRTC.

Correct me if have some wrong points. 

Thank you!
Perry.

> 
> >
> > Perry.
> >
> >>
> >> >
> >> > BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD
> >> > 0 P4D 0
> >> > Oops: 0010 [#1] SMP NOPTI
> >> > RIP: 0010:0x0
> >> > Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
> >> > RSP: 0018:ffffa8d64225bab8 EFLAGS: 00010246
> >> > RAX: 0000000000000000 RBX: 0000000000000020 RCX: ffffa8d64225bb5e
> >> > RDX: ffff93151d921880 RSI: ffffa8d64225bac8 RDI: ffff931511a1a9d8
> >> > RBP: ffffa8d64225bb10 R08: 0000000000000001 R09: ffffa8d64225ba60
> >> > R10: 0000000000000002 R11: 000000000000000d R12: 0000000000000001
> >> > R13: 0000000000000000 R14: ffffa8d64225bb5e R15: ffff931511a1a9d8
> >> > FS: 00007ff8ea7fa9c0(0000) GS:ffff9317fe6c0000(0000)
> >> > knlGS:0000000000000000
> >> > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >> > CR2: ffffffffffffffd6 CR3: 000000010d5a4000 CR4: 0000000000750ee0
> >> > PKRU: 55555554
> >> > Call Trace:
> >> > drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper]
> >> > drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper]
> >> > drm_dp_start_crc+0x38/0xb0 [drm_kms_helper]
> >> > amdgpu_dm_crtc_set_crc_source+0x1ae/0x3e0 [amdgpu]
> >> > crtc_crc_open+0x174/0x220 [drm]
> >> > full_proxy_open+0x168/0x1f0
> >> > ? open_proxy_open+0x100/0x100
> >> > do_dentry_open+0x156/0x370
> >> > vfs_open+0x2d/0x30
> >> >
> >> > v2: fix some typo
> >> >
> >> > Signed-off-by: Perry Yuan <Perry.Yuan@xxxxxxx>
> >> > ---
> >> >  drivers/gpu/drm/drm_dp_helper.c | 4 ++++
> >> >  1 file changed, 4 insertions(+)
> >> >
> >> > diff --git a/drivers/gpu/drm/drm_dp_helper.c
> >> > b/drivers/gpu/drm/drm_dp_helper.c index 6d0f2c447f3b..76b28396001a
> >> > 100644
> >> > --- a/drivers/gpu/drm/drm_dp_helper.c
> >> > +++ b/drivers/gpu/drm/drm_dp_helper.c
> >> > @@ -260,6 +260,10 @@ static int drm_dp_dpcd_access(struct
> >> > drm_dp_aux
> >> *aux, u8 request,
> >> >       msg.buffer = buffer;
> >> >       msg.size = size;
> >> >
> >> > +     /* No transfer function is set, so not an available DP connector */
> >> > +     if (!aux->transfer)
> >> > +             return -EINVAL;
> >> > +
> >> >       mutex_lock(&aux->hw_mutex);
> >> >
> >> >       /*
> >>
> >> --
> >> Jani Nikula, Intel Open Source Graphics Center
> 
> --
> Jani Nikula, Intel Open Source Graphics Center




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux