RE: [PATCH 2/4] drm/dp_mst: Only create connector for connected end device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[Public]

Thanks Lyude for patiently guiding on this : )
Would like to learn more as following

> -----Original Message-----
> From: Lyude Paul <lyude@xxxxxxxxxx>
> Sent: Wednesday, October 27, 2021 3:35 AM
> To: Lin, Wayne <Wayne.Lin@xxxxxxx>; dri-devel@xxxxxxxxxxxxxxxxxxxxx
> Cc: Kazlauskas, Nicholas <Nicholas.Kazlauskas@xxxxxxx>; Wentland, Harry <Harry.Wentland@xxxxxxx>; Zuo, Jerry
> <Jerry.Zuo@xxxxxxx>; Wu, Hersen <hersenxs.wu@xxxxxxx>; Juston Li <juston.li@xxxxxxxxx>; Imre Deak <imre.deak@xxxxxxxxx>;
> Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>; Daniel Vetter <daniel.vetter@xxxxxxxx>; Sean Paul <sean@xxxxxxxxxx>; Maarten Lankhorst
> <maarten.lankhorst@xxxxxxxxxxxxxxx>; Maxime Ripard <mripard@xxxxxxxxxx>; Thomas Zimmermann <tzimmermann@xxxxxxx>;
> David Airlie <airlied@xxxxxxxx>; Daniel Vetter <daniel@xxxxxxxx>; Deucher, Alexander <Alexander.Deucher@xxxxxxx>; Siqueira,
> Rodrigo <Rodrigo.Siqueira@xxxxxxx>; Pillai, Aurabindo <Aurabindo.Pillai@xxxxxxx>; Bas Nieuwenhuizen
> <bas@xxxxxxxxxxxxxxxxxxx>; Cornij, Nikola <Nikola.Cornij@xxxxxxx>; Jani Nikula <jani.nikula@xxxxxxxxx>; Manasi Navare
> <manasi.d.navare@xxxxxxxxx>; Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>; José Roberto de Souza <jose.souza@xxxxxxxxx>; Sean
> Paul <seanpaul@xxxxxxxxxxxx>; Ben Skeggs <bskeggs@xxxxxxxxxx>; stable@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH 2/4] drm/dp_mst: Only create connector for connected end device
>
> Comments below
>
> On Tue, 2021-10-26 at 03:50 +0000, Lin, Wayne wrote:
> > [Public]
> >
> > Hi Lyude!
> > Apologize for replying late and really thanks for elaborating in such
> > details!
> > Following are some of my thoughts : )
> >
> > > -----Original Message-----
> > > From: Lyude Paul <lyude@xxxxxxxxxx>
> > > Sent: Saturday, September 18, 2021 1:48 AM
> > > To: Lin, Wayne <Wayne.Lin@xxxxxxx>; dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > > Cc: Kazlauskas, Nicholas <Nicholas.Kazlauskas@xxxxxxx>; Wentland,
> > > Harry <Harry.Wentland@xxxxxxx>; Zuo, Jerry <Jerry.Zuo@xxxxxxx>; Wu,
> > > Hersen <hersenxs.wu@xxxxxxx>; Juston Li <juston.li@xxxxxxxxx>; Imre
> > > Deak <imre.deak@xxxxxxxxx>; Ville Syrjälä
> > > <ville.syrjala@xxxxxxxxxxxxxxx>; Daniel Vetter
> > > <daniel.vetter@xxxxxxxx>; Sean Paul <sean@xxxxxxxxxx>; Maarten
> > > Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>; Maxime Ripard
> > > <mripard@xxxxxxxxxx>; Thomas Zimmermann <tzimmermann@xxxxxxx>; David
> > > Airlie <airlied@xxxxxxxx>; Daniel Vetter <daniel@xxxxxxxx>; Deucher,
> > > Alexander <Alexander.Deucher@xxxxxxx>; Siqueira, Rodrigo
> > > <Rodrigo.Siqueira@xxxxxxx>; Pillai, Aurabindo
> > > <Aurabindo.Pillai@xxxxxxx>; Bas Nieuwenhuizen
> > > <bas@xxxxxxxxxxxxxxxxxxx>; Cornij, Nikola <Nikola.Cornij@xxxxxxx>;
> > > Jani Nikula <jani.nikula@xxxxxxxxx>; Manasi Navare
> > > <manasi.d.navare@xxxxxxxxx>; Ankit Nautiyal
> > > <ankit.k.nautiyal@xxxxxxxxx>; José Roberto de Souza
> > > <jose.souza@xxxxxxxxx>; Sean Paul <seanpaul@xxxxxxxxxxxx>; Ben
> > > Skeggs <bskeggs@xxxxxxxxxx>; stable@xxxxxxxxxxxxxxx
> > > Subject: Re: [PATCH 2/4] drm/dp_mst: Only create connector for
> > > connected end device
> > >
> > > Sorry about the slow response, this week XDC has been going on and
> > > I've been mostly paying attention to that.
> > >
> > > On Tue, 2021-09-14 at 08:46 +0000, Lin, Wayne wrote:
> > > > [Public]
> > > >
> > > > > -----Original Message-----
> > > > > From: Lyude Paul <lyude@xxxxxxxxxx>
> > > > > Sent: Thursday, September 2, 2021 6:00 AM
> > > > > To: Lin, Wayne <Wayne.Lin@xxxxxxx>;
> > > > > dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > > > > Cc: Kazlauskas, Nicholas <Nicholas.Kazlauskas@xxxxxxx>;
> > > > > Wentland, Harry <Harry.Wentland@xxxxxxx>; Zuo, Jerry
> > > > > <Jerry.Zuo@xxxxxxx>; Wu, Hersen <hersenxs.wu@xxxxxxx>; Juston Li
> > > > > <juston.li@xxxxxxxxx>; Imre Deak <imre.deak@xxxxxxxxx>; Ville
> > > > > Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>; Daniel Vetter
> > > > > <daniel.vetter@xxxxxxxx>; Sean Paul <sean@xxxxxxxxxx>; Maarten
> > > > > Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>; Maxime Ripard
> > > > > <mripard@xxxxxxxxxx>; Thomas Zimmermann <tzimmermann@xxxxxxx>;
> > > > > David Airlie <airlied@xxxxxxxx>; Daniel Vetter
> > > > > <daniel@xxxxxxxx>; Deucher, Alexander
> > > > > <Alexander.Deucher@xxxxxxx>; Siqueira, Rodrigo
> > > > > <Rodrigo.Siqueira@xxxxxxx>; Pillai, Aurabindo
> > > > > <Aurabindo.Pillai@xxxxxxx>; Bas Nieuwenhuizen
> > > > > <bas@xxxxxxxxxxxxxxxxxxx>; Cornij, Nikola
> > > > > <Nikola.Cornij@xxxxxxx>; Jani Nikula <jani.nikula@xxxxxxxxx>;
> > > > > Manasi Navare <manasi.d.navare@xxxxxxxxx>; Ankit Nautiyal
> > > > > <ankit.k.nautiyal@xxxxxxxxx>; José Roberto de Souza
> > > > > <jose.souza@xxxxxxxxx>; Sean Paul <seanpaul@xxxxxxxxxxxx>; Ben
> > > > > Skeggs <bskeggs@xxxxxxxxxx>; stable@xxxxxxxxxxxxxxx
> > > > > Subject: Re: [PATCH 2/4] drm/dp_mst: Only create connector for
> > > > > connected end device
> > > > >
> > > > > Actually - did some more thinking, and I think we shouldn't try
> > > > > to make changes like this until we actually know what the
> > > > > problem is here. I could try to figure out what the actual race
> > > > > conditions I was facing before with trying to add/destroy
> > > > > connectors based on PDT, but we still don't even actually have a
> > > > > clear idea of what's broken here.
> > > > > I'd much rather us figure out exactly how this leak is happening
> > > > > before considering making changes like this, because we have no
> > > > > way of knowing if we've properly fixed it or not if we don't
> > > > > know what the problem is in the first place.
> > > > >
> > > > > I'm still happy to write up the topology debugging stuff I
> > > > > mentioned to you if you think that would help you debug this
> > > > > issue - since that would make it a lot easier for you to track
> > > > > down what references are keeping a connector alive (and
> > > > > additkionally, where those references were taken in code. thanks
> > > > > stack_depot!)
> > > > Hi Lyude,
> > > > Sorry for late response. A bit busy on other stuff recently..
> > > >
> > > > Really really thankful for all your help : ) I'm also glad to have
> > > > the debugging tool if it won’t bother you too much. But before
> > > > debugging,
> > >
> > > no problem! I will get to it early next week then
> > >
> > > > I need to have consensus with you about where do we expect to
> > > > release resource allocated for a stream sink when it's reported as
> > > > disconnected. Previous patch suggests releasing resource when
> > > > connector is destroyed which will happen when topology refcount
> > > > reaches zero (i.e. unplug mstb from topology). But when the case
> > > > is receiving CSN notifying connection change, we don't try to
> > > > destroy connector in this case now. And this is not caused by
> > > > topology/malloc refcount leak since I don't expect neither one of
> > > > them get decrease to zero under this case (topology of mstbs and ports is not changed).
> > > > Hence, my plan was to also try to destroy connector under
> > >
> > > Ah - I wonder if this might have been where some of the confusion
> > > here came from. So-both mstbs and ports (assume I'm talking the
> > > actual drm_dp_mst_port and drm_dp_mst_branch structs here) are
> > > supposed to have non-zero topology refcounts as long as there is a
> > > valid path between the port or mstb, and our source. This also means
> > > that for ports, the drm_connector associated with these ports should
> > > stay around as long as the port is reachable from the sink
> > > - regardless of whether anything is actually plugged into the port or not.
> >
> > This concept is the place where a bit hard for me to get through.
> > I was thinking that we don’t have to associate a drm connector with a
> > MST port whenever the port exists, since MST port is not always
> > connected to a stream sink. I treat MST port as an intermediate node
> > of a virtual channel, which is an end-to-end direct virtual connection
> > between a stream source and a stream sink. Virtual channel could be
> > constructed by multiple link count and stream sink is connected at end
> > port. Hence,
>
> Just to clarify I'm understanding you correctly, when you say multiple link count do you just mean VCPI slots or do you mean two
> separate DP links? I haven't dealt with the former, but IIRC that is how certain high resolutions displays are handled over TB correct?

Sorry for not clarifying on this. I mean the case when LCT (link count total) field in the packet header is bigger than one. Which means
multiple hops from source to sink.
e.g.  src->mstb->mstb..->sink
I was trying to express the idea to only associate drm connector at the end point stream sink when this virtual channel path is constructed.
Since the idea of virtual channel is constructing an end-to-end direct connection, my first thought was intermediate ports are transparent
to userspace and no need to create drm connectors for them.

>
> Regardless though, I would think that we could just handle this mostly from the atomic state even with a connector for every port. For
> instance, i915 already has something called "big joiner" for supporting display configurations where one display can take up two
> separate display pipes (CRTCs). We could likely do something similar but with connectors if we end up having to deal with a display
> driven by two DP links.
>
> > I was thinking to associate a drm connector for end stream sink only.
> > I think we probably won't want to attach a connector to a
> > relay/retimer/redriver within a stream path? I treat MST port as the
> > similar role when It's fixed to connect to a MST branch device.
>
> If it's a fixed connection, this might actually be OK to avoid attaching connectors on. Currently with input ports where we know we can
> never receive a CSN for them during runtime, we're able to avoid creating a connector because no potential for CSN during runtime
> means the only possible time an input port could transition would be suspend/resume. So if we detect we're on another topology
> where something that was previously an output port that is an input port on the new topology, we get rid of the connector by
> removing the drm_dp_mst_port it's associated with from the topology and replace it with a new one. This works pretty well, as it
> avoids doing any actual connector destruction from the suspend/resume codepath and ensures that any pointer references to the
> now non-existent output port remain valid for as long as needed. So I might actually be open to expanding this for fixed connections
> like relays, retimers and redrivers if we handle things in a similar manner.
> For anything that can receive a CSN though, a drm_connector is unconditionally needed even if nothing's connected.

Want to deepen my knowledge here. Sorry Lyude could you explain more on this please?
Are you saying that if we change to associate drm connector as what I proposed in this patch, we will create actual connector destruction
from the suspend/resume codepath and which is a problem here? I thought once the connection status changed from connected to
disconnected during suspend/resume, we still use the same way as what we did in drm_dp_delayed_destroy_port():
i.e.
if (port->connector) {
        drm_connector_unregister(port->connector);
        drm_connector_put(port->connector);
}
We won't directly destruct the drm connector?

>
> >
> > I think it's a bit different to SST case. For legacy DP (before DP
> > 1.2), we can attach a connector to its physical end output port since
> > it's dedicated for a stream sink. But MST port is not. However, I
> > understand if there is any implementation requirement for us to
> > associate drm connector for all MST ports.
> >
> > >
> > > So - a CSN on it's own shouldn't really get rid of the port it was
> > > notifying us about. But if that CSN results in an MSTB -with- its
> > > own ports being removed, this would mean there would no longer be a
> > > valid path between our source and the ports on said MSTB and as such
> > > - the connector for each one of those ports is removed from the
> > > topology.
> > > Remember however, when I say "removed from the topology" what I'm
> > > referring to is the fact that the MST helpers have dropped the main
> > > topology reference for a given mstb or port.
> > > Since various MST helpers retrieve temporary topology references to
> > > connectors they work on in order to simplify handling I/O errors,
> > > the operations from those helpers would potentially keep the port or
> > > mstb around in the topology until those helpers have had a chance to
> > > abort and drop their refs. And then once all the topology references
> > > are released, a destruction worker gets scheduled which handles
> > > unregistering the drm_connector (not destroying it).
> > > The drm_connector stays around unregistered, up until the point at
> > > which all malloc references to the drm_dp_mst_port have been
> > > released.
> > >
> > > I think it may also be worth clarifying the lifetime of
> > > drm_connector itself here as well, since that also actually has a
> > > refcount. Basically, as long as userspace has a mode committed which
> > > references a drm_connector - that drm_connector will still exist in
> > > memory, and its mode object ID will remain valid. This means if we
> > > were to have a MST topology hooked up with one display turned on and
> > > then suddenly unplugged it, keeping in mind that the port with said
> > > display now becomes inaccessible from the topology, the
> > > drm_connector associated with that display would continue to have a
> > > valid mode object ID up until the point at which userspace has
> > > committed a new mode which disables it.
> > > The sysfs paths for the connector however, will disappear
> > > immediately once the connector is unregistered so as to ensure that
> > > userspace applications cannot try to reuse it later or attempt to reprobe it.
> > >
> > > Any resource releases beyond this (streams on the driver side, for
> > > instance) are up to the driver, but typically I would expect them to
> > > happen in the same places as they would with an SST connector. Does
> > > that answer your question?
> >
> > Unplug event of SST sink and MST remote sink is a bit different. SST
> > unplug event relies on long HPD IRQ but MST CSN relies on short HPD IRQ.
> > Now we use MST helper function drm_dp_mst_handle_conn_stat() to deal
> > with CSN short HPD IRQ. But within this function, driver won't get
> > notification of disconnection event to release associated allocated
> > resource. So, by not changing the drm connector association logic
> > here, should we add a new call back function here?
> >
> > Sorry Lyude, I don't understand as well as you on this and would like
> > to learn more from you. Please correct me if I misunderstand anything
> > here. Much appreciate!
>
> It's no problem at all! I'm always glad to help :). This still sounds a lot like a bug to me in amdgpu, because we actually do send a
> hotplug event here.
> Basically, the only function that calls this; drm_dp_mst_process_up_req(), will assume it needs to request a hotplug if we ever call
> drm_dp_mst_handle_conn_stat(). From there we pass this information up to drm_dp_mst_up_req_work(). Then once we've
> finished handling all pending up requests, we send a single hotplug to indicate to userspace it needs to reprobe everything.
>
Right! I might not recall correctly, but I think that's why I want this patch. I probably encountered that userspace doesn’t explicitly
try to react to this unplug event. Instead, it tries to react when we plug in monitor next time. And the problem is when we plug in
monitor next time, stale resources are not released yet. It then hits the limitation within our HW. Which let me want to explicitly
release resource once driver detect the unplug event (just like sst long HPD event I think).  By the way, just out of curiosity, when
do you think is the timing to release sink related resource if we rely on hotplug event notifying userspace? When userspace frees the
associated pipe of the connector? Won't it be a transient state that userspace just free the pipe temporarily?

> Also, I'm still working on the debugging stuff btw!
Much appreciate Lyude! Thanks!

>
> --
> Cheers,
>  Lyude Paul (she/her)
>  Software Engineer at Red Hat
--
Regards,
Wayne Lin




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux