Re: [PATCH] [RFC] dt-bindings: display: bridge: sil, sii9022: Convert to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 21, 2021 at 02:01:22PM +0200, Geert Uytterhoeven wrote:
> Convert the Silicon Image sii902x HDMI bridge Device Tree binding
> documentation to json-schema.
> 
> Add missing sil,sii9022-cpi and sil,sii9022-tpi compatible values.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> RFC as I do not know the meaning of the various ports subnodes.
> ---
>  .../bindings/display/bridge/sii902x.txt       |  78 ----------
>  .../bindings/display/bridge/sil,sii9022.yaml  | 133 ++++++++++++++++++
>  2 files changed, 133 insertions(+), 78 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/bridge/sii902x.txt
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> deleted file mode 100644
> index 3bc760cc31cbbeee..0000000000000000
> --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> +++ /dev/null
> @@ -1,78 +0,0 @@
> -sii902x HDMI bridge bindings
> -
> -Required properties:
> -	- compatible: "sil,sii9022"
> -	- reg: i2c address of the bridge
> -
> -Optional properties:
> -	- interrupts: describe the interrupt line used to inform the host
> -	  about hotplug events.
> -	- reset-gpios: OF device-tree gpio specification for RST_N pin.
> -	- iovcc-supply: I/O Supply Voltage (1.8V or 3.3V)
> -	- cvcc12-supply: Digital Core Supply Voltage (1.2V)
> -
> -	HDMI audio properties:
> -	- #sound-dai-cells: <0> or <1>. <0> if only i2s or spdif pin
> -	   is wired, <1> if the both are wired. HDMI audio is
> -	   configured only if this property is found.
> -	- sil,i2s-data-lanes: Array of up to 4 integers with values of 0-3
> -	   Each integer indicates which i2s pin is connected to which
> -	   audio fifo. The first integer selects i2s audio pin for the
> -	   first audio fifo#0 (HDMI channels 1&2), second for fifo#1
> -	   (HDMI channels 3&4), and so on. There is 4 fifos and 4 i2s
> -	   pins (SD0 - SD3). Any i2s pin can be connected to any fifo,
> -	   but there can be no gaps. E.g. an i2s pin must be mapped to
> -	   fifo#0 and fifo#1 before mapping a channel to fifo#2. Default
> -	   value is <0>, describing SD0 pin beiging routed to hdmi audio
> -	   fifo #0.
> -	- clocks: phandle and clock specifier for each clock listed in
> -           the clock-names property
> -	- clock-names: "mclk"
> -	   Describes SII902x MCLK input. MCLK can be used to produce
> -	   HDMI audio CTS values. This property follows
> -	   Documentation/devicetree/bindings/clock/clock-bindings.txt
> -	   consumer binding.
> -
> -	If HDMI audio is configured the sii902x device becomes an I2S
> -	and/or spdif audio codec component (e.g a digital audio sink),
> -	that can be used in configuring a full audio devices with
> -	simple-card or audio-graph-card binding. See their binding
> -	documents on how to describe the way the sii902x device is
> -	connected to the rest of the audio system:
> -	Documentation/devicetree/bindings/sound/simple-card.yaml
> -	Documentation/devicetree/bindings/sound/audio-graph-card.yaml
> -	Note: In case of the audio-graph-card binding the used port
> -	index should be 3.
> -
> -Optional subnodes:
> -	- video input: this subnode can contain a video input port node
> -	  to connect the bridge to a display controller output (See this
> -	  documentation [1]).
> -
> -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> -
> -Example:
> -	hdmi-bridge@39 {
> -		compatible = "sil,sii9022";
> -		reg = <0x39>;
> -		reset-gpios = <&pioA 1 0>;
> -		iovcc-supply = <&v3v3_hdmi>;
> -		cvcc12-supply = <&v1v2_hdmi>;
> -
> -		#sound-dai-cells = <0>;
> -		sil,i2s-data-lanes = < 0 1 2 >;
> -		clocks = <&mclk>;
> -		clock-names = "mclk";
> -
> -		ports {
> -			#address-cells = <1>;
> -			#size-cells = <0>;
> -
> -			port@0 {
> -				reg = <0>;
> -				bridge_in: endpoint {
> -					remote-endpoint = <&dc_out>;
> -				};
> -			};
> -		};
> -	};
> diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml
> new file mode 100644
> index 0000000000000000..4e5a8ecf87647e8b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml
> @@ -0,0 +1,133 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/sil,sii9022.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Silicon Image sii902x HDMI bridge
> +
> +maintainers:
> +  - Boris Brezillon <bbrezillon@xxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - sil,sii9022-cpi
> +              - sil,sii9022-tpi
> +          - const: sil,sii9022
> +      - const: sil,sii9022
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +    description: Interrupt line used to inform the host about hotplug events.
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  iovcc-supply:
> +    description: I/O Supply Voltage (1.8V or 3.3V)
> +
> +  cvcc12-supply:
> +    description: Digital Core Supply Voltage (1.2V)
> +
> +  '#sound-dai-cells':
> +    enum: [ 0, 1 ]
> +    description: |
> +      <0> if only i2s or spdif pin is wired,
> +      <1> if both are wired.
> +      HDMI audio is configured only if this property is found.
> +      If HDMI audio is configured the sii902x device becomes an I2S and/or
> +      spdif audio codec component (e.g. a digital audio sink), that can be used
> +      in configuring a full audio devices with simple-card or audio-graph-card
> +      binding. See their binding documents on how to describe the way the
> +      sii902x device is connected to the rest of the audio system:
> +      Documentation/devicetree/bindings/sound/simple-card.yaml
> +      Documentation/devicetree/bindings/sound/audio-graph-card.yaml
> +      Note: In case of the audio-graph-card binding the used port index should
> +      be 3.
> +
> +  sil,i2s-data-lanes:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 1
> +    items:
> +      - enum: [ 0, 1, 2, 3 ]
> +      - enum: [ 0, 1, 2, 3 ]
> +      - enum: [ 0, 1, 2, 3 ]
> +      - enum: [ 0, 1, 2, 3 ]

minItems: 1
maxItems: 4
uniqueItems: true
items:
  enum: [ 0, 1, 2, 3 ]


> +    description:
> +      Each integer indicates which i2s pin is connected to which audio fifo.
> +      The first integer selects i2s audio pin for the first audio fifo#0 (HDMI
> +      channels 1&2), second for fifo#1 (HDMI channels 3&4), and so on. There
> +      are 4 fifos and 4 i2s pins (SD0 - SD3). Any i2s pin can be connected to
> +      any fifo, but there can be no gaps. E.g. an i2s pin must be mapped to
> +      fifo#0 and fifo#1 before mapping a channel to fifo#2. Default value is
> +      <0>, describing SD0 pin being routed to hdmi audio fifo #0.
> +
> +  clocks:
> +    maxItems: 1
> +    description: MCLK input. MCLK can be used to produce HDMI audio CTS values.
> +
> +  clock-names:
> +    const: mclk
> +
> +  ports:
> +    type: object
> +    properties:
> +      port@0:
> +        type: object
> +        description: FIXME

Can't help you on that, but you need graph.yaml references on ports 
and all of these.

> +
> +      port@1:
> +        type: object
> +        description: FIXME
> +
> +      port@2:
> +        type: object
> +        description: FIXME
> +
> +      port@3:
> +        type: object
> +        description: FIXME
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        hdmi-bridge@39 {
> +            compatible = "sil,sii9022";
> +            reg = <0x39>;
> +            reset-gpios = <&pioA 1 0>;
> +            iovcc-supply = <&v3v3_hdmi>;
> +            cvcc12-supply = <&v1v2_hdmi>;
> +
> +            #sound-dai-cells = <0>;
> +            sil,i2s-data-lanes = < 0 1 2 >;
> +            clocks = <&mclk>;
> +            clock-names = "mclk";
> +
> +            ports {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                port@0 {
> +                    reg = <0>;
> +                    bridge_in: endpoint {
> +                        remote-endpoint = <&dc_out>;
> +                    };
> +                };
> +            };
> +        };
> +    };
> -- 
> 2.25.1
> 
> 



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux