Hi Doug On Wed, Oct 27, 2021 at 3:13 PM Doug Anderson <dianders@xxxxxxxxxxxx> wrote: > > Hi, > > On Tue, Oct 26, 2021 at 2:56 PM Philip Chen <philipchen@xxxxxxxxxxxx> wrote: > > > > Conventionally, panel is listed under the root of the device tree. > > When userland asks for display mode, ps8640 bridge is responsible > > for returning EDID when ps8640_bridge_get_edid() is called. > > > > Now enable a new option of listing panel under "aux-bus" of ps8640 > > bridge node in the device tree. In this case, panel driver can retrieve > > EDID by triggering AUX transactions, without ps8640_bridge_get_edid() > > calls at all. > > > > To prevent the "old" and "new" options from interfering with each > > other's logic flow, disable DRM_BRIDGE_OP_EDID when the new option > > is taken. > > > > Signed-off-by: Philip Chen <philipchen@xxxxxxxxxxxx> > > Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx> > > --- > > > > (no changes since v3) > > > > Changes in v3: > > - Fix when to call of_node_put() in ps8640_of_panel_on_aux_bus() > > > > Changes in v2: > > - Add of_node_put() calls in ps8640_of_panel_on_aux_bus() > > - Select DRM_DP_AUX_BUS for PS8640 driver in Kconfig > > - Replace _put_sync() with _put_sync_suspend() in ps8640_post_disable() > > Not that it terribly matters, but I don't think the "put_sync" vs. > "put_sync_suspend" was in patch #2/2. It was in #1/2. Oops, sorry, I did a terrible job separating the changes between patch #1/2 and #2/2. Will retroactively fix v2 change log when I post v5. > > > > drivers/gpu/drm/bridge/Kconfig | 1 + > > drivers/gpu/drm/bridge/parade-ps8640.c | 51 ++++++++++++++++++++------ > > 2 files changed, 40 insertions(+), 12 deletions(-) > > Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>