On 10/20/21 20:24, Naresh Kamboju wrote:
> Following kernel crash noticed on linux next 20211020 tag.
> while booting on arm64 architecture dragonboard 410c device.
>
> I see the following config is enabled in 20211020 tag builds.
> CONFIG_STACKDEPOT=y
>
> Crash log,
> [ 18.583097] Unable to handle kernel paging request at virtual
> address 00000000007c4240
> [ 18.583521] Mem abort info:
> [ 18.590286] ESR = 0x96000004
> [ 18.592920] EC = 0x25: DABT (current EL), IL = 32 bits
> [ 18.596103] SET = 0, FnV = 0
> [ 18.601512] EA = 0, S1PTW = 0
> [ 18.604384] FSC = 0x04: level 0 translation fault
> [ 18.607447] Data abort info:
> [ 18.612296] ISV = 0, ISS = 0x00000004
> [ 18.615451] CM = 0, WnR = 0
> [ 18.618990] user pgtable: 4k pages, 48-bit VAs, pgdp=000000008b4c7000
> [ 18.622054] [00000000007c4240] pgd=0000000000000000, p4d=0000000000000000
> [ 18.628974] Internal error: Oops: 96000004 [#1] SMP
> [ 18.635073] Modules linked in: adv7511 cec snd_soc_lpass_apq8016
> snd_soc_lpass_cpu snd_soc_lpass_platform snd_soc_msm8916_digital
> qcom_camss qrtr snd_soc_apq8016_sbc videobuf2_dma_sg qcom_pon
> qcom_spmi_vadc snd_soc_qcom_common qcom_q6v5_mss qcom_vadc_common
> rtc_pm8xxx qcom_spmi_temp_alarm msm qcom_pil_info v4l2_fwnode
> qcom_q6v5 snd_soc_msm8916_analog qcom_sysmon qcom_common v4l2_async
> qnoc_msm8916 qcom_rng gpu_sched qcom_glink_smem venus_core
> videobuf2_memops icc_smd_rpm qmi_helpers drm_kms_helper v4l2_mem2mem
> mdt_loader display_connector i2c_qcom_cci videobuf2_v4l2 crct10dif_ce
> videobuf2_common socinfo drm rmtfs_mem fuse
> [ 18.672948] CPU: 0 PID: 178 Comm: kworker/u8:3 Not tainted
> 5.15.0-rc6-next-20211020 #1
> [ 18.695000] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
> [ 18.695012] Workqueue: events_unbound deferred_probe_work_func
> [ 18.695033] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [ 18.715282] pc : __stack_depot_save+0x13c/0x4e0
> [ 18.722130] lr : stack_depot_save+0x14/0x20
> [ 18.726641] sp : ffff800014a23500
> [ 18.730801] x29: ffff800014a23500 x28: 00000000000f8848 x27: ffff800013acdf68
> [ 18.734294] x26: 0000000000000000 x25: 00000000007c4240 x24: ffff800014a23780
> [ 18.741413] x23: 0000000000000008 x22: ffff800014a235b8 x21: 0000000000000008
> [ 18.748530] x20: 00000000c32f8848 x19: ffff00001038cc18 x18: ffffffffffffffff
> [ 18.755649] x17: ffff80002d9f8000 x16: ffff800010004000 x15: 000000000000c426
> [ 18.762767] x14: 0000000000000000 x13: ffff800014a23780 x12: 0000000000000000
> [ 18.769885] x11: ffff00001038cc80 x10: ffff8000136e9ba0 x9 : ffff800014a235f4
> [ 18.777003] x8 : 0000000000000001 x7 : 00000000b664620b x6 : 0000000011a58b4a
> [ 18.784121] x5 : 000000001aa43464 x4 : 000000009e7d8b67 x3 : 0000000000000001
> [ 18.791239] x2 : 0000000000002800 x1 : ffff800013acd000 x0 : 00000000f2d429d8
> [ 18.798358] Call trace:
> [ 18.805451] __stack_depot_save+0x13c/0x4e0
> [ 18.807716] stack_depot_save+0x14/0x20
> [ 18.811881] __drm_stack_depot_save+0x44/0x70 [drm]
> [ 18.815710] modeset_lock.part.0+0xe0/0x1a4 [drm]
> [ 18.820571] drm_modeset_lock_all_ctx+0x2d4/0x334 [drm]
This stack_depot_save path appears to be new from Jani's commit
cd06ab2fd48f ("drm/locking: add backtrace for locking contended locks
without backoff")
And there's a semantic conflict with my patch in mmotm:
- sha1 (valid only in next-20211020) 5e6d063de5cd ("lib/stackdepot: allow
optional init and stack_table allocation by kvmalloc()")
- lore: https://lore.kernel.org/all/20211013073005.11351-1-vbabka@xxxxxxx/
- patchwork: https://patchwork.freedesktop.org/series/95549/#rev3
With my patch, to-be callers of stack_depot_save() need to call
stack_depot_init() at least once, to avoid unnecessary runtime overhead
otherwise I have added that calls into three DRM contexts in my patch, but
didn't see cd06ab2fd48f yet at the time.
This one seems a bit more tricky and I could really use some advice.
cd06ab2fd48f adds stackdepot usage to drm_modeset_lock which itself has a
number of different users and requiring those to call stack_depot_init()
would be likely error prone. Would it be ok to add the call of
stack_depot_init() (guarded by #ifdef CONFIG_DRM_DEBUG_MODESET_LOCK) to
drm_modeset_lock_init()? It will do a mutex_lock()/unlock(), and kvmalloc()
on first call.
I don't know how much of hotpath this is, but hopefully should be acceptable
in debug config. Or do you have better suggestion? Thanks.
Then we have to figure out how to order a fix between DRM and mmotm...
> [ 18.825435] drm_client_firmware_config.constprop.0.isra.0+0xc0/0x5d0 [drm]
> [ 18.830478] drm_client_modeset_probe+0x328/0xbb0 [drm]
> [ 18.837413] __drm_fb_helper_initial_config_and_unlock+0x54/0x5b4
> [drm_kms_helper]
> [ 18.842633] drm_fb_helper_initial_config+0x5c/0x70 [drm_kms_helper]
> [ 18.850266] msm_fbdev_init+0x98/0x100 [msm]
> [ 18.856767] msm_drm_bind+0x650/0x720 [msm]
> [ 18.861021] try_to_bring_up_master+0x230/0x320
> [ 18.864926] __component_add+0xc8/0x1c4
> [ 18.869435] component_add+0x20/0x30
> [ 18.873253] mdp5_dev_probe+0xe0/0x11c [msm]
> [ 18.877077] platform_probe+0x74/0xf0
> [ 18.881328] really_probe+0xc4/0x470
> [ 18.884883] __driver_probe_device+0x11c/0x190
> [ 18.888534] driver_probe_device+0x48/0x110
> [ 18.892786] __device_attach_driver+0xa4/0x140
> [ 18.896869] bus_for_each_drv+0x84/0xe0
> [ 18.901380] __device_attach+0xe4/0x1c0
> [ 18.905112] device_initial_probe+0x20/0x30
> [ 18.908932] bus_probe_device+0xac/0xb4
> [ 18.913098] deferred_probe_work_func+0xc8/0x120
> [ 18.916920] process_one_work+0x280/0x6a0
> [ 18.921780] worker_thread+0x80/0x454
> [ 18.925683] kthread+0x178/0x184
> [ 18.929326] ret_from_fork+0x10/0x20
> [ 18.932634] Code: d37d4e99 92404e9c f940077a 8b190359 (c8dfff33)
> [ 18.936203] ---[ end trace 3e289b724840642d ]---
>
> Full log,
> https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20211020/testrun/6177937/suite/linux-log-parser/test/check-kernel-oops-3786583/log
> https://lkft.validation.linaro.org/scheduler/job/3786583#L2549
>
> Build config:
> https://builds.tuxbuild.com/1zlLlQrUyHVr1MQ1gcler3dKaE6/config
>
> Reported-by: Linux Kernel Functional Testing <lkft@xxxxxxxxxx>
>
> steps to reproduce:
> 1) https://builds.tuxbuild.com/1zlLlQrUyHVr1MQ1gcler3dKaE6/tuxmake_reproducer.sh
> 2) Boot db410c device
>
> --
> Linaro LKFT
> https://lkft.linaro.org
>
