This allows the DSI bridge to detect the correct bus format.
We currently only support MEDIA_BUS_FMT_RGB888_1X24.
Signed-off-by: Guido Günther <agx@xxxxxxxxxxx>
---
drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
index f0e9bce23c41..d6bcf1045255 100644
--- a/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
+++ b/drivers/gpu/drm/panel/panel-mantix-mlaf057we51.c
@@ -8,6 +8,7 @@
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
+#include <linux/media-bus-format.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/regulator/consumer.h>
@@ -232,6 +233,10 @@ static const struct drm_display_mode default_mode_ys = {
.height_mm = 130,
};
+static const u32 mantix_bus_formats[] = {
+ MEDIA_BUS_FMT_RGB888_1X24,
+};
+
static int mantix_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
@@ -253,6 +258,10 @@ static int mantix_get_modes(struct drm_panel *panel,
connector->display_info.height_mm = mode->height_mm;
drm_mode_probed_add(connector, mode);
+ drm_display_info_set_bus_formats(&connector->display_info,
+ mantix_bus_formats,
+ ARRAY_SIZE(mantix_bus_formats));
+
return 1;
}
--
2.33.0
